Cart 2 india

Specification
Brand : Wenteq
BulletPoint1 : Used with Kurt 6 inch Vise- May fit others with a 11/16 (0.688") Vise slot width
BulletPoint2 : 11/16X 5/8 inch
BulletPoint3 : 1 package consists of 2 keys and 2 screws
BulletPoint4 : Fits Tables that have a 5/8 (0.625") slot width
BulletPoint5 : Fits many Machines like- HAAS, OKUMA, MAZAK, HURCO, FADAL, BRIDGEPORT
BulletPoint6 : Manufactured from AMERICAN 4140 Steel
ExternallyAssignedProductIdentifier1 : 190735823064
ExternallyAssignedProductIdentifier2 : 0190735823064
IncludedComponents : includes mounting bolts
ItemName : Kurt Style Vise Step Keys
ItemPackageDimensions_Height : 0.88 inches
ItemPackageDimensions_Length : 3.5 inches
ItemPackageDimensions_Width : 1.75 inches
ItemPackageQuantity : 1
ItemTypeKeyword : bench-vises
Manufacturer : Wenteq
Material : Alloy Steel
ModelName : Vise Keys for Haas
ModelNumber : WEN-625688
NumberOfItems : 1
PartNumber : 3FDH8
ProductDescription : Introducing our Pearl Drill Vise, the essential tool for jewelers, artisans, and hobbyists! Adjusts easily to accommodate beads from 3mm to 22mm, ensuring precise drilling from the bottom. Unleash your creativity and elevate your designs with our reliable Pearl Drill Vise!

Before using the pearl drill vise, make sure the pearl is clean and free from any debris or dirt. It's also a good idea to mark the spot where you want to drill the hole using a pencil or a marker. Open the jaws of the pearl drill vise by loosening the screw or adjusting the clamp mechanism. Place the pearl between the jaws of the vise, ensuring that it is centered and held securely in place. Use the adjustable features of the vise to position the pearl exactly where you want to drill the hole. You can adjust the angle and orientation of the pearl to ensure the hole is drilled in the desired location. Once the pearl is properly positioned, tighten the jaws of the vise securely around the pearl. Make sure it is held firmly in place to prevent any movement during the drilling process. Using a small drill bit suitable for drilling pearls, carefully drill into the marked spot on the pearl. Apply gentle pressure and drill slowly to avoid cracking or damaging the pearl. It's important to use a steady hand and to keep the drill bit perpendicular to the surface of the pearl. Once the hole is drilled, remove the pearl from the vise and clean it thoroughly to remove any dust or debris generated during the drilling process. You can use a soft cloth or a mild cleaning solution to gently wipe the surface of the pearl. After drilling the hole, inspect the pearl to ensure that the hole is clean and smooth. If necessary, you can use a fine-grit sandpaper or a jewelry file to smooth out any rough edges around the hole. Whether you're making a necklace, earrings, or bracelet, the drilled pearl can now be used as a beautiful and unique component of your jewelry piece.
ProductDescription1 : vise keys are used to align your vise to your milling machine table.
ProductDescription2 : We use these on all of out vises in the shop. It WILL SAVE you so much time on setup. You can set a vise on your machine table and have it aligned automatically within 0.003". From them you can align better if needed. This saves a bunch of time when doing multiple vises. We have have a novice employee have 5 vises installed in a machine and aligned within 0.005" in under 10 minutes. Removing and installing vises in no longer a chore! We have 100's of satisfied customers using these.
ProductSiteLaunchDate : 2023-08-29T01:51:44.637Z
Size : Pearl Drill Vise - 2-Inch Square
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 2