Specifications:
Voltage: 110V, 0.1A
Power: 65W
Rotating speed: 4200r/min
Working table size: 165x165 mm
Machine size: 250*250*250 mm
Rotating shaft in grinding table (fine shaft with grinding head): diameter 0.7cm
Grinding wheel inner diameter: 0.79cm
Machine weight: 2.26kg
Color: Red
Application:
1.Suitable for grinding glass,ceramics and other hard and brittle material.
2. Two models of Grinding wheel for this machine, respectively, are mcbl1,mcbl58, we will send one free MCBL58Grinding Wheel
3.Inside the rotary shaft (the fine shaft of the grinding head) diameter: 0.7cm, Grinding wheel inner diameter: 0.79cm
Grinding wheel installation:
1. Before installation of grinding wheel, topped with lubricant, engine shaft grinding wheels need to apply a layer of lubricant inside.
2. The grinding wheel mounted to the engine shaft, the fixed screw position higher than the engine shaft. The position of the grinding wheel on the axle must be at least 1/8" diamond part above the operating table.
3. Fixed grinding wheel on the shaft with hexagonal wrench clock wisely.
Installation Note: Maintain stability of the grinding wheel installed in the engine shaft of the plane.
Operation Note:
1. Can not grinding without water. Ensure the grinding wheel is wet
2. When using the grinding wheel, with small strength , don't use too much strength.Too much
strength will reduce grinding machine and the service life of the grinding wheel.
3. After using, clean the water reservoir. Remove the reservoir, clean up the rest of the residue
after grinding.
4. In order to prolong the service life of grinding machine, cleaning and add lubricant to the engine shaft, 25 hours af
ProductSiteLaunchDate : 2023-04-19T07:54:30.984Z
Size : 250*250*250 mm
Style : Pencil
UnitCount : 1
Voltage : 110 volts