Description
Good tools are indispensable to complicated polishing operations. Our belt sander can help you solve this problem. Made of high-quality Q235 steel plate and 6061 aluminum alloy, and adopting galvanizing process and anti-rust treatment, this item lays a foundation for your long-term use. 550W power, 6000 r/min speed, and 3Nm torque can greatly improve your efficiency. With it, you can completely say goodbye to the traditional polishing method and work more easily.
Details
Round Corners: Compared with traditional square corners, an arc design can better care for your skin.
Practical Bearings: Double bearings can play the role of anti-slip and dust-proof to ensure that your work is carried out smoothly.
Two Belts: Two 30*0.98inch belts can help you finish the grinding work more efficiently and are also very cost-effective.
Long Power Cord and Motor Line: The 5.91ft power cord and 31.5inch motor line allow you to have plenty of disposable lengths, thus reducing the limitation when you use it.
Application
This item can polish grind knives, castings, tools, various ferrous metals, non-ferrous metals, plastics, wood, etc. It is widely used in homes, workshops, manufacturing plants, decoration plants, construction sites, and other places.
Specification
Color: Silver
Model: P3
Material: Q235 Steel and 6061 Aluminum Alloy
Surface Treatment: Galvanizing and Anti-rust Treatment
Style: Modern
Power: 550W/0.8HP
Motor Type: Pure Copper Brushless Motor
Rotated Speed: 6000rpm
Linear Velocity: 30m/s/98.43ft/s
Torque: 3Nm
Mesh Number of Blue Belt: 60mesh
Mesh Number of Brown Belt: 800mesh
Mount Type: Free Standing
Noise: 60dB and 90dB
Voltage: 110V 60Hz
Plug Type: US Standard
Power Cord Length: 1.8m/5.91ft
Motor Line Length: About 80cm/31.5inch
Belt Size: 762*25mm/30*0.98inch
Number of Bearings: 2
Number of Belts: 2
Power Source: Corded Electric
Product Size: 24*19*25cm/9.5*7.5*9.9inch
Gross Weight: 7.5kg/16.53lbs
Net Weight: 7kg/15.43lbs
Packing Size: 40*30*25cm/15.75*11.81*9.84inch
Package Included
1* Belt Sander
1* Controller
2* Belts
1* Conversion Plug
1* Bilingual Manual(English+Chinese)
All Accessories for Installation
Notes
1.Please strictly follow the operating instructions and pay attention to the safety precautions mentioned.
2.Please note that the product cannot be placed horizontally and turned 90 degrees, and the angle of the workbench and belt tightness cannot be adjusted.
3.Please note that the system must be grounded, otherwise there will be an electric shock hazard. It is forbidden to connect the system to a power supply with a voltage exceeding AC260V. Please do not open the front and rear covers of the drive and motor when the system is powered on.
4.Your satisfaction is our top concern, if you receive any defective products, please never hesitate to contact us.
5.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.