Cart 2 india

Specification
Amperage : 2 amps
Brand : Bed Claw
BulletPoint1 : Purpose and Application: These inserts are made to be inserted into your bedframe leg to allow the connection of a 3/8" threaded glide.
BulletPoint2 : Opening Required for Insertion: The required 1/2" diameter round opening must be approximately 1" deep for the plug to fit. The opening may be deeper than 1" as the plug is open at the top to allow long threaded glides to be accommodated. The long threaded shaft of the glide will pass through the top of the plug and continue into the cavity in the bedframe leg.
BulletPoint3 : Approximate Dimensions:
BulletPoint4 : 1-1/8" Tall
BulletPoint5 : 1/2" Shaft Exterior Top Diameter
BulletPoint6 : Bottom Flange Diameter: 3/4"
BulletPoint7 : 3/8" Threaded Center Hole
Color : Black
CompatibleDevices : Electric Bed
ConnectivityTechnology : DC Barrel
ConnectorType : Barrel Connector
CurrentRating : 2 amps
ExternallyAssignedProductIdentifier1 : 0672233753710
ExternallyAssignedProductIdentifier2 : 672233753710
FabricType : Polyester
FormFactor : compact
FrequencyRange : 50Hz to 60Hz
IncludedComponents : 2 x Power Adapter
InputVoltage : 240 volts
ItemDisplayDimensions_Height : 0.04 centimeters
ItemDisplayDimensions_Length : 314.96 centimeters
ItemDisplayDimensions_Width : 1.02 centimeters
ItemDisplayWeight : 0.55 pounds
ItemName : 3/8" Threaded Plastic Bed Frame Insert Plugs for Glides, Casters, Socket Sleeves (Set of 6)
ItemPackageDimensions_Height : 1.18 inches
ItemPackageDimensions_Length : 4.72 inches
ItemPackageDimensions_Width : 3.54 inches
ItemPackageQuantity : 1
ItemShape : Cylindrical
ItemTypeKeyword : bed-replacement-parts
Manufacturer : BED CLAW
Material : Plastic
ModelName : 21240017
ModelNumber : 21240017
MountingType : Wall Mount
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
NumberOfPowerLevels : 1
OutputCurrent : 2 amps
OutputVoltage : 29 volts_of_direct_current
PartNumber : 21240017
PowerPlugType : type_a_2pin_na
PowerSourceType : AC
ProductDescription : Purpose and Application: These inserts are made to be inserted into your bedframe leg to allow the connection of a 3/8" threaded glide. Opening Required for Insertion: The required 1/2" diameter round opening must be approximately 1" deep for the plug to fit. The opening may be deeper than 1" as the plug is open at the top to allow long threaded glides to be accommodated. The long threaded shaft of the glide will pass through the top of the plug and continue into the cavity in the bedframe leg. Approximate Dimensions: 1-1/8" Tall, 1/2" Shaft Exterior Top Diameter, Bottom Flange Diameter: 3/4", 3/8" Threaded Center Hole
ProductSiteLaunchDate : 2024-10-30T00:00:00.000-07:00
Size : Set of 6
SpecificationMet : CE
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700
Wattage : 58 watts