NDZZQBPGO TMP1105 CSK17 One Way Bearing Clutches Without Keyway 17x40x12mm Steel Bearing CKK17 CSK6203 Free Wheel Clutch Bearings CSK203

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 6300/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : NDZZQBPGO
BulletPoint : Bearing
Color : One Color
ExternallyAssignedProductIdentifier : 8017266757991
ItemName : NDZZQBPGO TMP1105 CSK17 One Way Bearing Clutches Without Keyway 17x40x12mm Steel Bearing CKK17 CSK6203 Free Wheel Clutch Bearings CSK203
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : bearing-hinges
Manufacturer : NDZZQBPGO
ModelNumber : NDZZQBPGO
NumberOfItems : 1
PartNumber : NDZZQBPGO
ProductDescription : Bearing
Bearing
CSK ONE WAY BEARING CLUTCHES
Type CSK is a sprag type clutch integrated into a 62 Series ball bearing (except sizes 8 and 40). It is bearing supported, shipped grease lubricated and protected against dust larger than .012"(.3mm) diameter. The use of additional "nylon" type seals is recommended especially when the working temperature exceeds 122°F (50°C).
Oil bath lubrication is also possible if the original grease is first flushed out using a suitable solvent.
Torque transmission is ensured by a press fit assembly into a rigid outer housing with N6 tolerance, and onto a shaft with n6 tolerance. The initial bearing radial clearance is set at C5, and is reduced if using the press fit as specified.
One race may be glued. If both races are to be glued, performance will be reduced or a C3 bearing clearance will be necessary.
Operating temperature range: 21 to 140°F (-6 to 60°C).
CSK..2RS clutches are .197" (5mm) wider than a standard 62 Series bearing, as they are equipped with lip seals Compatible with wash down applications.
CSK..PP features a keyway on both the inner and outer race. The recommended mounting tolerances are k6 on the shaft and K6 in a rigid housing.
An h6 tolerance on the shaft or H6 in the housing are also acceptable Compatible with a light press fit assembly.
Operating temperature range: 21 to 140°F (-6 to 60°C).
ProductSiteLaunchDate : 2024-09-06T08:50:04.379Z
Size : One Size
UnitCount : 1

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.