Cart 2 india

Specification
Brand : Gatuida
BulletPoint1 : Wheel pulling machine--can be use for disassembled the bearing and shaft tool, also can be use for remove all kinds of mechanical equipment of pulley, gears, bearings and so on,gear puller
BulletPoint2 : Gear puller--design for slide gears, pulley, and flywheel use, makes removal simple and damage- ,three-jaw puller
BulletPoint3 : Handle puller--freely rotate, upon the center point form pull wheel to piston, the center point to be pulled is easily met,gear puller
BulletPoint4 : Three-jaw puller--jaws can be adjusted from high to low point, make you use it more easily and conviently,gear puller
BulletPoint5 : Warm tip: dear buyer, due to lighting effect, monitor's brightness, manual measurement, etc., there could be some slight differences in the color and size between the photo and the actual item. sincerely hope that you can understand! thank you!,bearing puller,gear puller
BulletPoint6 : Feature3: Use with 5lbs Hammer to Knock Frozen Hubs out of Axles
Color : As Shown
FabricType : Carbon Steel
FitType : Universal
IncludedComponents : Tools
IsAssemblyRequired : 1
ItemName : Gatuida 3 Bearing Puller Gear Puller Three-jaw Puller Handle Puller
ItemPackageDimensions_Height : 1.57 inches
ItemPackageDimensions_Length : 4.92 inches
ItemPackageDimensions_Width : 2.36 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-bearing-pullers
Manufacturer : Gatuida
Material : Carbon Steel
ModelName : Jaw Pullers
ModelNumber : W1115187Q6T
NumberOfItems : 5
NumberOfLithiumMetalCells : 1
PartNumber : W1115187Q6T
Pattern : Solid
ProductDescription : Package List
1 x Gear Puller

Features
- Material: Carbon Steel Handle Puller.
- Color: As Shown Gear Puller.
- Pulling force: 1.5 tons Wheel Pulling Machine
- Screw hardness: up to HRC45 Bearing Puller
- Connecting bolts: M8
- Diameter at the tip: 9MM
- Itinerary: 80MM
- Hexagonal width: 14MM
- Screw thread: M14
- Pole length: 120MM
- Material: carbon steel
- Screw strength rating: 4.8
- Size: 10.5 x 7.5 x 7.5 cm.
- Warm Tip: Dear buyer, due to lighting effect, monitor's brightness, manual measurement, etc., there could be some slight differences in the color and size between the photo and the actual item. Sincerely hope that you can understand! Thank you!
- Top diameter: 50-100MM
- Design for Slide Gears, Pulley, and Flywheel use Makes removal simple and damage- Three-jaw Puller.
- Jaws can be adjusted from high to low point. Make you use it more easily and conviently.
- Freely rotate. Upon the center point form pull wheel to piston, the center point to be pulled is easily met.
- Can be use for disassembled the bearing and shaft tool, also can be use for remove all kinds of mechanical equipment of pulley, gears, bearings and so on.

Goods Information
Three-jaw Puller Professional designed, easy to use, make you do the mechanical works easily and high efficiently.Gear Puller It has compact structure, flexible use, easy to carry and save labour, less site limitation,suitable for all kinds of maintenance use.Handle Puller Made by material, durable and provide
ProductSiteLaunchDate : 2024-04-14T00:00:00.000-07:00
Size : Size 1
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 25170000
WarrantyDescription : 1 year warranty