Cart 2 india

Specification
AgeRangeDescription : adult
Brand : DNGXAOYA
BulletPoint1 : PULLERS: Hydraulic Gear Puller is made of heavy duty forged steel for strength and no oil leakage. It is very sturdy with a maximum capacity of 20T/44000LB and a long service life.
BulletPoint2 : INDUSTRIAL GRADE STRENGTH: The pump body is forged and hardened at high temperatures so that it will not deform or bend even after prolonged use. The finely machined jaws provide a stronger grip. The entire hydraulic pulley puller is made of industrial grade steel with premium rust and corrosion resistant coating.
BulletPoint3 : FLEXIBLE JAW CONVERSION: Two or three jaws can be installed and the height can be adjusted as needed. Easy for you to operate and use the tool. Ideal for getting a firm grip on heavy and large parts during disassembly.
BulletPoint4 : Bi-directional operation: This gear puller can perform both horizontal and vertical pulling operations, making it easy to operate machine parts in different directions. It has a shaft stroke of 2.3in/6cm, a maximum stroke of 7.8in/20cm and a maximum spread of 13.7in/35cm.
BulletPoint5 : WIDE APPLICATION: The hydraulic steering wheel puller kit is ideal for pulling hubs, flanges, gears, pulleys, flywheels, bearing chucks off the shaft. It is widely used in automotive workshops, machine shops and repair shops, etc.
Color : One Color
ExternallyAssignedProductIdentifier : 7351542516614
ItemName : DNGXAOYA Hydraulic Puller, 35cm/13.7in Hydraulic Puller Separator Tool, 20T Maximum Pulling Capacity Wheel Puller, 2-Jaw or 3-Jaw Bearing Hub Separator, Bearing Puller with Tool Case(15T/33000LB)
ItemPackageDimensions_Height : 15 centimeters
ItemPackageDimensions_Length : 45 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-bearing-pullers
Manufacturer : SHENGHE
ModelName : SHENGHE
ModelNumber : SHENGHE
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : SHENGHE
ProductDescription : One-piece molding without oil leakage hydraulic pulling horse, light weight, small size, more convenient to carry.
Alloy steel high temperature forging claw, no deformation, no breakage.
2 claws and 3 claws can be switched at will, flexible use, to cope with different use scenarios.
Vertical and horizontal can be used, convenient to operate the machine parts in different directions.
Hardened forged thimble, sturdy and wear-resistant, non-slip handle, effectively prevent the operation is slippery.
Suitable for pulling hubs, flanges, gears, bearings, etc.

Hydraulic tooth extractor
Load capacity: 5T/11000LB , 10T/22000LB , 15T/33000LB , 20T/44000LB
Horizontal pulling distance: 20cm/7.8in, 25cm/9.8in, 30cm/11.8in, 35cm/13.7in
Vertical pull distance: 14cm/5.5in, 16cm/6.3in, 18cm/7in, 20cm/7.8in
Ejector Stroke: 5cm/2in, 6cm/2.3in.
Weight: 5.8kg/12.7lb, 10kg/22lb, 11kg/24.2lb, 16kg/35.21b
Jaws: 2 or 3 jaws can be replaced.
Size: 37*16*16cm/14.5*6.3*6.3in.

Note: Due to the shooting angle and light problem, the product color will have reasonable color difference.
The size is measured manually, there will be errors, please refer to the actual size.

Please feel free to contact us if you don't understand or have any questions about this product. We are committed to customer satisfaction.
ProductSiteLaunchDate : 2025-01-08T06:50:34.228Z
Size : 15T/33000LB
UnitCount : 1
UnspscCode : 24101600