Specification Brand : Walfront BulletPoint1 : 360 Degree Pump Head,:The hydraulic puller adopts the design of 360-degree pump head, which is easy to operate and easy to use. After rotation, it can quickly the working center according to the distance between the puller and the position center. BulletPoint2 : Easy to Operate:The hydraulic puller pump has a safety relief valve to avoid oil pressure overload, and is equipped with a flexible operating handle, which is convenient to use and requires only a small amount of operation to obtain great pulling force. BulletPoint3 : :The hydraulic puller is made of carbon steel and cast iron, which is very strong and , has a long service life and good load capacity, and the maximum capacity can reach 5T BulletPoint4 : 3 Pulling Claws:This multifunctional hydraulic puller kit has three adjustable pulling claws and can be pulled with two or three legs according to different needs. It can easily remove bearings, gears, hubs, flanges, seat rings, sprockets. BulletPoint5 : Application:The product is suitable for traction hubs, flanges, gears and bearings, Ares travel: 2 inches (50 mm). It is an indispensable tool in agricultural, mechanical, garage and industrial uses. ItemName : 5T Hydraulic Gear Puller Pump with 3 Pulling Claws and Yellow Plastic Box for Removing Bearings Gears Hubs ItemPackageDimensions_Height : 11 centimeters ItemPackageDimensions_Length : 45 centimeters ItemPackageDimensions_Width : 32 centimeters ItemTypeKeyword : automotive-bearing-pullers Manufacturer : WALFRONT ModelName : WALFRONTehtpkwvg9c ModelNumber : WALFRONTehtpkwvg9c NumberOfItems : 1 PartNumber : WALFRONTehtpkwvg9c ProductDescription : Specification: Features: Made of forged steel, this hydraulic puller is very strong and , with good bearing capacity and long service life. It is equipped with 3 pulling claws, which can be adjusted from high to low, and can be pulled with two or three legs according to different needs. There is a handle that can be opened, which can be operated with very little operation and get great pulling force. The safety overflow valve control switch on the pump body is ready to avoid oil pressure overload. The hydraulic puller adopts the design of 360-degree pump head, which is easy to operate and easy to use. After rotation, it can quickly the working center according to the distance between the puller and the position center. Suitable for traction hubs, flanges, gears and bearings, with a maximum carrying capacity of 10 tons.
Package list: 1 x Hydraulic Puller 1 x Handle 1 x 2/3 Leg Puller Yoke 3 x Jaws 6 x Nuts and Bolts 6 x Link Plates 1 x Nose Adapter 1 x Carrying Case Note: Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.