Cart 2 india

Specification
Brand : EVTSCAN
BulletPoint1 : Scope of Application: This battery capacity tester is mainly used for test the capacity of battery, check for better using experience!
BulletPoint2 : LCD Display: The 1.77in screen displays internal resistance, capacity, voltage, current, power and other information at the same time.
BulletPoint3 : Modes Adjustable: Preset automatic and charging and discharging modes, and select corresponding modes after starting.
BulletPoint4 : Data Reset: The power off, mode switch will make the data capacity, energy and time data automatically reset.
BulletPoint5 : Working Instructions: Some components will produce local high temperature during charging and discharging during use. Please ensure that the use environment is open and of cover. It is better to increase fan heat dissipation. In order to ensure that the battery clamp is firm, the battery tester is more suitable for flat head battery measurement.
IncludedComponents : no
ItemName : Battery Internal Resistance Tester 1.77in LCD Display Modes Adjustable Lithium Battery Capacity Tester DC5V
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemTypeKeyword : auto-battery-testers
Manufacturer : EVTSCAN
MeasurementAccuracy : 0.1mm
ModelName : EVTSCAN3eqd49vz2c
ModelNumber : EVTSCAN3eqd49vz2c
NumberOfItems : 1
PartNumber : EVTSCAN3eqd49vz2c
ProductDescription :

Item Type: Battery Internal Resistance Tester
Material: PCB
Screen Size: Approx. 1.77in / 4.5cm
Working Power Supply: DC5V power supply or battery x 2 (shipped without battery)
Applicable Battery: Suitable for all batteries that meet the requirements of stopping discharge voltage of 2.5-3.5V and starting from 2.8V to 4.2V
Power Supply Interface: Type C interface, power supply line self prepared (C port mobile phone line)
System Language: Chinese (default), English
Test Quantity: 1 way charging and discharging measurement (only right battery position)
Internal Resistance Measurement: Support, use DC two wire method to test internal resistance
Charging Function: Support, automatic cut off charging when fully charged (lithium iron battery charging is not supported)
Discharge Function: Support, automatically stop when conditions are met, and the discharge current is not adjustable
Automatic Charging and Discharging: Support. The battery is fully charged at the end of automatic mode
Cyclic Charging and Discharging: Support, 1 to 9 cycles adjustable (only supported in automatic mode)
Status Prompt: Support
Stop Discharge Voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 11 adjustable gears
Discharge Current: Two circuit resistance, maximum current of about 1A, non adjustable, independent transformation not supported
Charging Voltage: Controlled by a special battery charging chip, with a maximum charge of about 1A and a full charge voltage of 4.2V
Power Off Saving: Only save the set parameters, not the measurement data

Package List：
1 x

Battery Internal Resistance Tester
Note:
1. Lithium iron battery charging is not supported.2. When using the extension wire to connect the test battery externally, the line resistance affects the internal resistance measurement, and the internal resistance test results have no reference value. After the
ProductSiteLaunchDate : 2025-06-06T09:51:04.892Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 26111700