Cart 2 india

Specification
Amperage : 8 amps
Brand : Powerwerx
BulletPoint1 : With a wide input voltage range of 8-36VDC, this DC-to-DC charger for LiFePO4 batteries can be powered by multiple sources.
BulletPoint2 : User selectable 2A, 4A, or 8A charging current.
BulletPoint3 : Anderson Power 30A power connector for quick and easy installation.
BulletPoint4 : NOTE: This DC-to-DC charger is intended for use with Bioenno LiFePO4 or equivalent batteries. This charger should not be used with Flooded, AGM or GEL type batteries as it will overcharge them.
ExternallyAssignedProductIdentifier1 : 0840128906217
ExternallyAssignedProductIdentifier2 : 840128906217
ItemName : Powerwerx DCDC-8A 14.5V, 8A Adjustable DC-to-DC Battery Charger for 12V LiFePO4 Batteries
ItemPackageDimensions_Height : 1.62 inches
ItemPackageDimensions_Length : 7.78 inches
ItemPackageDimensions_Width : 4.73 inches
ItemPackageQuantity : 1
ItemTypeKeyword : general-use-battery-chargers
Manufacturer : Powerwerx
OutputVoltage : 14.5 volts_of_direct_current
PartNumber : DCDC-8A
ProductDescription :

The Powerwerx DCDC-8A is an adjustable DC-to-DC charger for charging 12V LiFePO4 batteries. 

2-Stage Charging Profile:

The DCDC-8A uses a 2-stage Constant Current (CC) Constant Voltage (CV) charging profile. 

User Selectable Charging Amperage:

This unit provides a user selectable 2A, 4A, or 8A charging current, and can be selected by using the selector dial. Below you will find suggested charging amperages based off of your batteries capacity.

Wide Input Voltage Range:

With a wide input voltage range of 8-36VDC, this DC-to-DC charger can be powered by multiple sources.

Installation:

The DCDC-8A uses Anderson Power 30A connectors for quick and easy installation.

NOTE: The DCDC-8A is an air-cooled unit and can become quite hot while charging.

Specifications:

• Input Voltage: 8-36 VDC
• Output Voltage: 14.5 VDC
• Connector Type: Anderson Power 30A power connector
• Maximum Power: 116 Watts
• Output Current: 2A/4A/8A (user selectable)
• Battery Type: LiFePO4
• Conversion Efficiency: 95%
• IP Rating: IP68 
• Overcurrent Protection: Yes
• Over voltage protection: Yes
• Output Short Circuit Protection: Yes
• Over Temperature Protection: Yes
• Dimensions: 5.4" x 3.0" x 1.2"
• Weight: 1.15 lbs.

NOTE: This DC-to-DC charger is intended for use with Bioenno LiFePO4 or equivalent batteries. This charger should not be used with Flooded, AGM or GEL type batteries as it will overcharge them.

ProductSiteLaunchDate : 2022-03-02T21:29:00.132Z
UnspscCode : 26111704
Wattage : 116