HOW TO USE:
1. Plug in the charger to AC socket, all the lamp will be blinking
sequentially then solid “power” LED ON.
2. Connect positive charger clip (red) to positive battery terminal, the
black clip to negative. (You can use other dc plugs to connect
battery), the “Green 4LEDs ”lamps will light in sequence. If the
battery polarity reversed or output shorted, the “Green 4LEDs”lamps
will flashing simultaneously, please DISCONNECT&CHECK.
3. Depend on the charged battery capacity that the “Green 4LEDs”light
up solid, when all are ON, the battery is fully charged, you can
disconnect the battery to use or keep it connected to charge in float
mode.if battery stays at stage 2 after 24 hours of charging, then the
battery is defective.
WARNING!
1.This charger is designed for charging AGM, GEL, Flooded(Wet), Calium
type deep cycle, VRLA maintenance free lead acid batteries from 15 to
150Ah,Do not use for any other purpose
2.Since batteries may emit explosive gases,always provide good
ventilation and avoid any source of flames or sparks when charging.
3.To reduce risk of damage to electric plug and cord,pull by the
plug rather than by the cord when disconnecting charger.
4.Use of an improper extension cord could result in a risk of fire
and electric shock
5.Do not operate charger if you notice any signs of damage to charger or
cords
6.Do not disassemble the charger;take it to a qualified serviceman when
service of repair is required.in correct reassembly may result in a risk of
electrical shock or fire.
7.To reduce risk of electric shock,unplug charger from AC outlet before
Package Included:
1 x 24V 5A Automati
ProductSiteLaunchDate : 2022-09-05T07:51:35.372Z
Size : Charger (Gen 2)
SpecificationMet : UL, CE, FCC
SpecificationMet1 : CE
SpecificationMet2 : FCC
StreetDate : 2022-09-05T00:00:01Z
Style : 40V 2A Charger
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111704
Voltage : 24 volts
WarrantyDescription : 3 year warranty on all greenworks battery chargers
Wattage : 30 watts