Cart 2 india

Specification
Brand : USA Knifemaker Supply
BulletPoint1 : When you order 1 quantity, you receive a 12" piece
BulletPoint2 : This is sheared, surface ground and ground to a specified thickness with tolerance of +.010"
BulletPoint3 : CPM MagnaCut is a new alloy developed by Dr Larrin Thomas the premeire metallurgist in the Knife steel industry. he teamed up Niagara Speciality Metals to create this new exciting alloy
BulletPoint4 : Composition of CPM MagnaCut Steel Carbon 1.15% Chromium 10.7% Vanadium 4.00% Molybdenum 2.00% Niobium 2.0% Nitrogen 0.2%
BulletPoint5 : See product description for heat treat information
Color : Silver
ExternallyAssignedProductIdentifier : 9072636237496
ItemForm : Bar
ItemName : Stainless Steel Bar- CPM-MagnaCut- Surface Ground- .093" Thick-Stainless Steel for Knifemaking, Metalworking, Forging- 12" Piece (1, 093"x1")
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemShape : Bar
ItemTypeKeyword : stainless-steel-bars
Manufacturer : Niagara Specialty Metals
Material : Steel
ModelName : LCKDY
ModelNumber : Cosyhat
NumberOfItems : 1
PartNumber : MagnaCut-SG
ProductDescription : HR means hot rolled and this steel was rolled to thickness usually during the smelting process but maybe later. The steel generally will be half or nearly fully hard depending on the type. It may often have mill scale residue. This steel can be easily forged. It can also be ground via stock removal. Drilling a hole in the tang maybe hard to do with out a carbide bit. HRA is the same but the steel was later annealed to relieve stress and make it as soft as possible for easier machining. Several companies produce "powder" smelted steels. This is a premium smelting process that improves the mixing of alloy content and generally produces a finer grain structure as a result. The powder steels are nearly always annealed and can be assumed to annealed unless noted otherwise. Heat Treatment for CPM MagnaCut Wrap blade in stainless steel heat treat foil Bring it up to Austenitizing temp 2050F and hold for 15 - 30 minutes Quench in air or plate quench. A Cryo treatment in liquid nitrogen (or dry ice) before tempering will increase hardness Temper between 350F twice at 2 hours each time. Cool to room temperature in between tempers.
ProductSiteLaunchDate : 2024-04-05T17:12:11.792Z
Size : .093"x1"
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1