Cart 2 india
In2Cart
Rs. 0
0
Home / Pet Supplies / Barriers
Product Information
Editorial Review
Pet Net Barrier kit | 49" w Parts List 1. Pet Net mesh body 2. Fiberglass rod (for top curve) 3. (2) ball bungees (for headrests) 4. (4) hook bungees for cornersCURVED TOP - (Optional): You can choose to have the curve raised, or let it hang down, depending on your visibility requirements. In smaller vehicles, the curve reaches all the way to the ceiling. It is very flexible and will bend slightly to conform to the shape of your roof... also helping it to stay in position. -If you choose to let the curve hang down, remove the fiberglass rod and place the extra netting between the seat and the netting to keep it secureInstallation guidelines 1. We suggest the Installation video ... travelin-k9 2. Assemble fiberglass rod, thread through sleeve, bend slightly to insert in end pockets. 3. Insert the "looped" end of both ball bungees through the appropriate grommet, grab the remaining 4 hook bungee cords and climb into the back seat of your vehicle. 4. Wrap and stretch the ball bungee cords around your headrests. Loosely holds NET for next step. 5. Top Corners attach to the handles above each door (or side handles in some SUV's, Trucks & Mini-Vans) bottom corners attach to the seat frameNOTE: Not intended to stop a determined dog - some training required net will not keep a determined dog from coming around the sides of seatsQUESTIONS: Please make sure there are overhead or side pillar handles in your vehicle to attach the hooks before you place your order
Features
1) SIZE & PLACEMENT: Completely covers space between front seats. Net is 49" W x 35" H without 9" Curve (49" W x 44" H with Curve extension) Adjustable height and width using additional grommets. OPTIONAL CURVED TOP: You can choose to have the curve raised or let it hang down
2) OVERHEAD HANDLES: Normally the best area to secure top corners. Thread cord through the handle, one hook in the corner grommet; second hook wraps onto itself ... should be loose. Move to the other side and repeat. Increase tension if necessary by putting both hooks in the grommet.
3) SIDE (Pillar) HANDLES: Found on many SUV's & Mini-Vans. Same as above. If you need more tension, try stretching one of the hooks over to the vertical metal bar of your headrest. ii. NOTE: Curved top (with side handle install) may not have enough tension to stay upright. Try removing the ball bungee from the grommet and wrapping it around the fiberglass rod above the grommet and then stretching around the headrest.
4) BOTTOM CORNERS - can be secured to the seat belt housing by the floor (wrap the bungee), or hooked or wrapped around the front seat frame near the floor.
5) MATERIAL: Flexible heavy-duty nylon is claw-resistant | WASHING: Hand Wash & Hang to Dry. TOOLS: None Required NOTE: Please make sure there are overhead or side pillar handles in your vehicle to attach the hooks before you place your order
Specification
Binding : Misc.
Brand : Travelin K9
Color : Black
EAN : 0869306000141
Label : Travelin K9
Manufacturer : Travelin K9
Model : 1656-PN-00141
PackageDimensions_Weight : 1.15 pounds
PackageDimensions : L:14.00 X W:8.27 X H:1.73
ProductGroup : Pet Products
ProductTypeName : PET_SUPPLIES
Publisher : Travelin K9
Size : 49" w x 35" h without curve
Studio : Travelin K9
Title : Pet Net Vehicle Safety Mesh Dog Barrier - 49"W for SUV / Car / Truck / Van - Fits Behind Front Seats
Pet Net Barrier kit | 49" w Parts List 1. Pet Net mesh body 2. Fiberglass rod (for top curve) 3. (2) ball bungees (for headrests) 4. (4) hook bungees for cornersCURVED TOP - (Optional): You can choose to have the curve raised, or let it hang down, depending on your visibility requirements. In smaller vehicles, the curve reaches all the way to the ceiling. It is very flexible and will bend slightly to conform to the shape of your roof... also helping it to stay in position. -If you choose to let the curve hang down, remove the fiberglass rod and place the extra netting between the seat and the netting to keep it secureInstallation guidelines 1. We suggest the Installation video ... travelin-k9 2. Assemble fiberglass rod, thread through sleeve, bend slightly to insert in end pockets. 3. Insert the "looped" end of both ball bungees through the appropriate grommet, grab the remaining 4 hook bungee cords and climb into the back seat of your vehicle. 4. Wrap and stretch the ball bungee cords around your headrests. Loosely holds NET for next step. 5. Top Corners attach to the handles above each door (or side handles in some SUV's, Trucks & Mini-Vans) bottom corners attach to the seat frameNOTE: Not intended to stop a determined dog - some training required net will not keep a determined dog from coming around the sides of seatsQUESTIONS: Please make sure there are overhead or side pillar handles in your vehicle to attach the hooks before you place your order
Features
1) SIZE & PLACEMENT: Completely covers space between front seats. Net is 49" W x 35" H without 9" Curve (49" W x 44" H with Curve extension) Adjustable height and width using additional grommets. OPTIONAL CURVED TOP: You can choose to have the curve raised or let it hang down
2) OVERHEAD HANDLES: Normally the best area to secure top corners. Thread cord through the handle, one hook in the corner grommet; second hook wraps onto itself ... should be loose. Move to the other side and repeat. Increase tension if necessary by putting both hooks in the grommet.
3) SIDE (Pillar) HANDLES: Found on many SUV's & Mini-Vans. Same as above. If you need more tension, try stretching one of the hooks over to the vertical metal bar of your headrest. ii. NOTE: Curved top (with side handle install) may not have enough tension to stay upright. Try removing the ball bungee from the grommet and wrapping it around the fiberglass rod above the grommet and then stretching around the headrest.
4) BOTTOM CORNERS - can be secured to the seat belt housing by the floor (wrap the bungee), or hooked or wrapped around the front seat frame near the floor.
5) MATERIAL: Flexible heavy-duty nylon is claw-resistant | WASHING: Hand Wash & Hang to Dry. TOOLS: None Required NOTE: Please make sure there are overhead or side pillar handles in your vehicle to attach the hooks before you place your order
Specification
Binding : Misc.
Brand : Travelin K9
Color : Black
EAN : 0869306000141
Label : Travelin K9
Manufacturer : Travelin K9
Model : 1656-PN-00141
PackageDimensions_Weight : 1.15 pounds
PackageDimensions : L:14.00 X W:8.27 X H:1.73
ProductGroup : Pet Products
ProductTypeName : PET_SUPPLIES
Publisher : Travelin K9
Size : 49" w x 35" h without curve
Studio : Travelin K9
Title : Pet Net Vehicle Safety Mesh Dog Barrier - 49"W for SUV / Car / Truck / Van - Fits Behind Front Seats
