Cart 2 india

Specification
Brand : Sysrox
BulletPoint1 : ✏️SYSROX PRECISION BAROMETER enables pressure measurements with a range of 260 hPa-1260hPa (-1876m-10100m relative to sea level) and temperature, usable as an altimeter... Reading frequency up to 75Hz.
BulletPoint2 : ✏️NEW GENERATION SENSOR (LPS22HB) HIGH PRECISION replacing older BMP180-BMP280 less performing. Improved resolution and noise level.
BulletPoint3 : ✏️FULLY CUSTOMIZABLE SOFTWARE for reading and configuring the sensor using SPI bus, compatible with Arduino, perfect for ESP32 or Teensy 4.
BulletPoint4 : ✏️MINIATURE DEVELOPMENT BOARD 1cm x 1cm with 2.54 mm pin spacing for easy prototyping of robotic applications, drones... Clipable prototype pins allowing use on a breadboard or non-permanent mounting on a support card.
BulletPoint5 : ✏️ONLINE COMPREHENSIVE DOCUMENTATION enabling easy utilization of the board and extension of the offered functionalities.
ExternallyAssignedProductIdentifier : 3760406260039
ExternallyAssignedProductIdentifier1 : 747925405557
ExternallyAssignedProductIdentifier2 : 0747925405557
IncludedComponents : Breakout board, Snappable pins (males + females), Straight pins, Antistatic bag
ItemName : Sysrox LPS22HB High Precision Barometric Pressure/Altitude/Temperature Sensor Nano Barometer with SPI Communication for Arduino or Raspberry
ItemPackageDimensions_Height : 0.4 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-barometers
Manufacturer : Sysrox
Material : Chrome
ModelNumber : SRX-IMU00-DEV
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : SRX-IMU00-DEV
ProductDescription :

The SRX-BARO00-DEV is a high-performance barometer usable as a base for an altimeter, for example.

 

It includes: 

A barometer: ST LPS22HB

 

in the form of a miniature development board perfect for the development and prototyping of robotic applications. 

 

Paired with the included C++ library, it allows for precise measurements of altitude, pressure, or temperature. 

 

Included Software 

 

A complete and customizable software is included, enabling quick utilization of the board.

 

✅ It can be deployed on ESP32-S3 immediately.

✅ Full reading and configuration of the sensor are available on any microcontroller with the Arduino framework. 

 

⚠️ The proposed board includes only the sensors and not a microcontroller, which must be added additionally and connected to the board to benefit from the stated functionalities...

 

Comprehensive Documentation 

 

Expand your application's capabilities easily with comprehensive and regularly updated documentation. Board Specifications 

 

✏️ Dimensions: 10.5mm x 10.5mm x 1.6mm 

✏️ Power Supply: 3.3V 

✏️ Interfaces: SPI (used by the proposed code). 

 

Raw Sensor Performance (default software settings) 

These measurements were taken with the proposed software and with default settings used for sensor reading. For more information on the capabilities of each sensor, refer to the supplier datasheet.

 

✔️ Barometer (LPS22HB) 

Range ............................. 260-1260 hPa 

Noise (RMS): .................. 0.0087 hPa (0.073m) 

Pressure accuracy : ……. 1 Pa (0.1m) 

Temperature accuracy : … 1.5 °C 

Sensitivity: ..................... 0.0244 Pa (0.002 m) 

Polling frequency: ..... 71.4 Hz 

Bandwidth (-3dB): .. 35.7 Hz

ProductSiteLaunchDate : 2024-03-31T15:07:30.371Z
StreetDate : 2017-03-12T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1