Cart 2 india

Specification
Brand : ChillWaves
BulletPoint1 : SIZE - 1/4" ID x 1/4" ID Reusable Hose Splicer Repair Fitting. Note, if you want it to work on rubber and polyurethane hoses, please check the size before buying and you may need to thin the outer layer of the hose.
BulletPoint2 : MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
BulletPoint3 : Use - for hose extension and repair, temperature and pressure resistance, good sealing and repeatability, no need for welding and flaring tools, easy disassembly, installation and maintenance, etc.It is suitable for most gases, water, oils and corrosive liquids.
BulletPoint4 : WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65°F to +250°F (-53°C to +121°C)
BulletPoint5 : NOTICE - For PVC, PE and other plastic hoses, these brass fittings are low in lead but not suitable for drinking water.
Color : Tee Barb
ConnectorType : Barb
ConnectorType1 : Tee
ConnectorType2 : Barb
ConnectorType3 : Reducer
Department : Unisex Adult
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier : 7453965870271
ExternallyAssignedProductIdentifier1 : 713807492861
ExternallyAssignedProductIdentifier2 : 0713807492861
IncludedComponents : connector
ItemDisplayDimensions_Length : 3.27 centimeters
ItemDisplayWeight : 0.2 pounds
ItemName : ChillWaves Brass Pneumatics Reusable Replacement Fitting，Reusable Hose Splicer 1/4" ID Hose x 1/4" ID Hose（1/4" Barb）Repair Fitting(5-PACK)
ItemPackageDimensions_Height : 7.1882 centimeters
ItemPackageDimensions_Length : 2.794 centimeters
ItemPackageDimensions_Width : 4.2926 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : barbed-hose-fittings
Manufacturer : ChillWaves
Material : Brass
ModelName : 5/16" Hose ID / Hose Barb 90 Degree L Right Angle Elbow Barbed Brass Fitting Fuel / Air / Water / Boat / Gas / Oil WOG
ModelNumber : 126-2A
NumberOfItems : 5
NumberOfLithiumMetalCells : 1
NumberOfPieces : 5
PartNumber : CWJX074D
ProductDescription :

Air tool fittings are parts of the air pressure system that act as connections, controls, reversals, shunts, seals and supports.

Note that these brass fittings are low in lead but not suitable for drinking water.

OPERATION STEPS：

1. Cut off the damaged part of the hose, first pass the hose through the nut holding the seal.

2. Thread the hose into the same size barbed head.

3. Tighten by hand or with a wrench to prevent the hose from falling off.

4. For PVC, PE and other plastic hoses. If you want it to work on rubber hoses, please check the size before buying and you may need to thin the outer layer of the hose.

5. When purchasing pipe fittings, consider the application as this will affect the material type, shape, size and desired durability. Fittings are threaded or unthreaded and come in many shapes, styles, sizes and schedules (wall thickness)

PACKAGE INCLUDED:

5 x 1/4" ID Hose x 1/4" ID Hose Reusable Hose Splicer Repair Fitting

ProductSiteLaunchDate : 2022-09-18T08:39:39.038Z
Size : 1/4" Barb x 1/4" Barb
Style : PACK OF 5
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 5
UnspscCode : 40141700