Cart 2 india

Specification
Brand : Supercut
BulletPoint : 8' 11"(8 feet 11 inch) High-Alloy Steel Butcher Blade for Cutting Bone-in Meat or Frozen Fish;
BulletPoint1 : Made from high silicon, low carbon steel
BulletPoint2 : Run cooler and last longer
BulletPoint3 : Teeth are milled
BulletPoint4 : Run under low tension and produce a thin kerf
BulletPoint5 : Fits Jet 16" Model JWBS-16 & More
BulletPoint6 : Bandsaw blades 59 1/2 inch long, 3/10" wide, 0.017" thick
Color : No Color
CompatibleMaterial : Metal
CompatibleMaterial1 : Leather
CompatibleMaterial2 : Alloy Steel
CompatibleMaterial3 : Wood
CompatibleMaterial4 : Alloy Steel
ExternallyAssignedProductIdentifier1 : 0764968841463
ExternallyAssignedProductIdentifier2 : 764968841463
IncludedComponents : Olson 44-7/8″ Long X 1/2″ Wide – for Portable Band Saws - 3 Pack
ItemDisplayDimensions_Length : 14 inches
ItemDisplayWeight : 0.92 pounds
ItemName : SuperCut B107T58T4 Meat Bandsaw Blade, 107" Long - 5/8" Width, 4 Hook Tooth, 0.025" Thickness
ItemPackageDimensions_Height : 49.784 centimeters
ItemPackageDimensions_Length : 1.905 centimeters
ItemPackageDimensions_Width : 17.526 centimeters
ItemPackageQuantity : 1
ItemShape : Circular
ItemTypeKeyword : band-saw-blades
Manufacturer : SuperCut
Material : Alloy Steel
ModelName : Olson 44-7/8″ Long X 1/2″ Wide – for Portable Band Saws - 3 Pack
ModelNumber : BM92343
NumberOfItems : 3
NumberOfTeeth : 4
PackageLevel : unit
PartNumber : B107T58T4
ProductDescription : This butcher band saw blade is made from a high quality, stain resistant steel with easy-cleaning polished sides. It features precision ground, heat-treated teeth that are razor sharp and have a tooth profile designed for cutting meat and bone, i.e. Bone-in beef, pork, lamb and fish cutting. If the teeth of the bandsaw blade are pointing in the opposite direction of your machine, flip the blade inside out. Warning: For packaging purposes, this blade is folded into a coiled position similar to a spring and may pop open during coiling or uncoiling. Wear heavy-duty leather gloves and eye/body protection, and exercise extreme caution when handling the blade. Failure to do so could result in serious bodily injury. Refer to your bandsaw owner's manual for further safety instructions. Please consult your owner's/operation manual to ensure that the blade's length, width, and thickness are compatible with your band saw machine. If in doubt when determining your bandsaw blade length, please refer the instructions below: 1 - Check the owner's manual of your bandsaw machine for specifications. Check not only the length, but also the range of the width and of the thickness 2 - If the owner's manual is not available, refer to your previous invoices. 3 - Uncoil your blade and use a soft cloth measuring tape and accurately measure the length by pressing tape tightly at the back end of your old blade. 4 - Mark a starting point on the floor and on your blade. Line up the starting point on your blade with the starting point on the floor. Roll the blade along the floor in a straight line until the starting point on the blade reaches the ground for the second time. Measure the length from the start point to the end point on the floor. 5 - Cut your old blade in half so that it lies flat and flush on a leveled surface and measure its length.
ProductSiteLaunchDate : 2009-09-26T05:36:53.000-00:00
Size : One Size
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700