Cart 2 india

Specification
Brand : POWERTEC
BulletPoint : 8' (8 feet) Long; .049" Kerf
BulletPoint1 : INCLUDES: 59-1/2 inch bandsaw blade (5 pieces) for Sears Craftsman, Porter-Cable, Ryobi, Delta, B&D and Skil 9" Band Saw – suitable for most 59-1/2" long, 3/8" wide, 0.014" thick bandsaw blades
BulletPoint2 : QUALITY: The band saw blade is made from premium, high grade carbon steel with heat resistance and weld
BulletPoint3 : DESIGN: This precision cutting tool is constructed with an optimal geometric tooth arrangement that provides seamless cutting results at high performance speeds
BulletPoint4 : APPLICATION: Flexible carbon hard edge blade works perfectly with hard and soft woods, plastic, and plus non-ferrous metals
BulletPoint5 : TEETH SPECS: 6tpi blade has a hook teeth profile
Color : Black
CompatibleMaterial : Wood
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Metal
CompatibleMaterial3 : Aluminum
CompatibleMaterial4 : Copper
CompatibleMaterial5 : Brass
ExternallyAssignedProductIdentifier1 : 843441128953
ExternallyAssignedProductIdentifier2 : 0843441128953
IncludedComponents : (5) Band Saw Blade 59-1/2" x 3/8" x 6 TPI
ItemDisplayDimensions_Length : 13 inches
ItemDisplayWeight : 0.71 pounds
ItemName : POWERTEC 59-1/2 Inch Bandsaw Blades, 3/8" x 6 TPI Band Saw Blades for Wen 3959, Sears Craftsman, Porter-Cable, Ryobi, Delta, B&D and Skil 9" Band Saw for Woodworking, 5 Pack (13101-P5)
ItemPackageDimensions_Height : 29.6 centimeters
ItemPackageDimensions_Length : 7.7 centimeters
ItemPackageDimensions_Width : 24.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : band-saw-blades
Manufacturer : POWERTEC
Material : Carbon Steel
ModelNumber : 13101-P5
NumberOfItems : 5
NumberOfTeeth : 6
PackageLevel : unit
PartNumber : 13101-P5
ProductDescription : Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material. All bandsaw blades carried by Magnate (TM) are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. If the teeth of the bandsaw blade are pointing in the opposite direction of your machine, flip the blade inside out. Warning: For packaging purposes, this blade is folded into a coiled position similar to a spring and may pop open during coiling or uncoiling. Wear heavy-duty leather gloves and eye/body protection, and exercise extreme caution when handling the blade. Failure to do so could result in serious bodily injury. Refer to your bandsaw owner's manual for further safety instructions.
ProductSiteLaunchDate : 2023-12-08T03:38:13.361Z
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 27112700