Cart 2 india

Specification
Amperage : 1100 amps
Brand : MAGNATE
BulletPoint : 7' 8-1/2" (7 feet 8-1/2 inch) Long; 0.025" Thickness; .049" Kerf
BulletPoint1 : Uncoated (Bright) Finish
BulletPoint2 : .1800 Minimum Bore
BulletPoint3 : .2500 Shank Diameter
BulletPoint4 : .5000 Maximum Depth
BulletPoint5 : Wide range of uses: This hinge boring machine is suitable for drilling holes in various boards (density board, MDF, pressed solid wood board, PV board, etc.), and is mainly used for drilling and manufacturing of cabinets, wardrobes, and doors.
Color : Black
CompatibleMaterial : Metal
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Metal
CompatibleMaterial3 : Aluminum
CompatibleMaterial4 : Copper
CompatibleMaterial5 : Brass
CustomerPackageType : Standard Packaging
DrillType : basic_drill
ExternallyAssignedProductIdentifier : 6977740430241
ExternallyAssignedProductIdentifier1 : 0764968910114
ExternallyAssignedProductIdentifier2 : 764968910114
IncludedComponents : 45-9.5mm Hinge Drilling and Boring Machine
IsElectric : 1
ItemDisplayDimensions_Length : 12 inches
ItemDisplayWeight : 0.7 pounds
ItemName : Magnate M92.5C12H6 Carbon Steel Bandsaw Blade, 92-1/2" Long - 1/2" Width, 6 Hook Tooth
ItemPackageDimensions_Height : 64.135 centimeters
ItemPackageDimensions_Length : 41.275 centimeters
ItemPackageDimensions_Width : 41.91 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : band-saw-blades
Manufacturer : Magnate
Material : Steel Alloy
MaximumRotationalSpeed : 2840 rpm
ModelName : DONGSE
ModelNumber : DONGSE
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfTeeth : 6
PartNumber : M92.5C12H6
PowerSourceType : Corded Electric
ProductDescription : Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material. All bandsaw blades carried by Magnate (TM) are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. If the teeth of the bandsaw blade are pointing in the opposite direction of your machine, flip the blade inside out. Warning: For packaging purposes, this blade is folded into a coiled position similar to a spring and may pop open during coiling or uncoiling. Wear heavy-duty leather gloves and eye/body protection, and exercise extreme caution when handling the blade. Failure to do so could result in serious bodily injury. Refer to your bandsaw owner's manual for further safety instructions.
ProductSiteLaunchDate : 2007-12-24T07:11:26.000-00:00
Size : .3750
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700
Voltage : 110 volts
Wattage : 1100 watts