Cart 2 india

Specification
Brand : MAGNATE
BulletPoint : 5' 10-1/2" (5 feet 10-1/2 inch) Long; 0.025" Thickness; .049" Kerf
BulletPoint1 : Made from high silicon, low carbon steel
BulletPoint2 : Run cooler and last longer
BulletPoint3 : Teeth are milled
BulletPoint4 : Run under low tension and produce a thin
BulletPoint5 : fits Craftsman 9" 21419 2 wheel saw only, Not for 3 wheel saws
Color : Yellow
CompatibleMaterial : Wood
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Metal
CompatibleMaterial3 : Aluminum
CompatibleMaterial4 : Copper
CompatibleMaterial5 : Brass
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0764968905844
ExternallyAssignedProductIdentifier2 : 764968905844
IncludedComponents : 1 pack 94" long, 3/4" wide, 0.035" thick, 10/14TPI
ItemDisplayDimensions_Length : 10 inches
ItemDisplayWeight : 0.58 pounds
ItemName : Magnate M70.5C12R24 Carbon Steel Bandsaw Blade, 70-1/2" Long - 1/2" Width, 24 Raker Tooth
ItemPackageDimensions_Height : 34.29 centimeters
ItemPackageDimensions_Length : 7.874 centimeters
ItemPackageDimensions_Width : 32.766 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : band-saw-blades
Manufacturer : Magnate
Material : Steel Alloy
ModelNumber : Timber Wolf 62-1/2-4
NumberOfItems : 1
NumberOfTeeth : 24
PartNumber : M70.5C12R24
ProductDescription : Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material. All bandsaw blades carried by Magnate (TM) are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. If the teeth of the bandsaw blade are pointing in the opposite direction of your machine, flip the blade inside out. Warning: For packaging purposes, this blade is folded into a coiled position similar to a spring and may pop open during coiling or uncoiling. Wear heavy-duty leather gloves and eye/body protection, and exercise extreme caution when handling the blade. Failure to do so could result in serious bodily injury. Refer to your bandsaw owner's manual for further safety instructions.
ProductSiteLaunchDate : 2007-12-04T07:20:20.000-00:00
Size : 5' 4-1/2"
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112700