Cart 2 india

Specification
Brand : MAGNATE
BulletPoint : 0.042" Thickness; 13 ft. 11 inch Long
BulletPoint1 : 0.042" Thickness; To be used to cut 1-in to 6-in (taller if fed slow) wood or 3-in to 11-in steel
BulletPoint2 : 13 ft. 11 inch Long
BulletPoint3 : ☂ Applicable Smooth Transition Height 1.57 in: Perfect suitable for the threshold transition where the height difference between the carpet/floor/door/carpet/tile and the ground is within 2 cm (0.78 inch) to 4 cm (1.57 inch)
BulletPoint4 : ☂ Easy to Cut & Install The floor strip is easy to install, no need to punch, no need to tighten screws, simple installation, you can adjust the height and length of your own use.
BulletPoint5 : ☂ Suitable for Any High Traffic Area: Our edging trim strip level out possible differences of levels like of vinyl planks, concrete floor, tile, LVT, hardwood floor, laminate, sweeping robot ramp etc.
Color : One Color
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Metal
CompatibleMaterial3 : Aluminum
CompatibleMaterial4 : Copper
CompatibleMaterial5 : Brass
ExternallyAssignedProductIdentifier : 8144691637663
ExternallyAssignedProductIdentifier1 : 0764968992592
ExternallyAssignedProductIdentifier2 : 764968992592
ItemDisplayDimensions_Length : 2 inches
ItemDisplayWeight : 3.7 pounds
ItemName : Magnate M167M114V5 Bi-Metal Bandsaw Blade, 167" Long - 1-1/4" Width, 5-8 Variable Tooth
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : band-saw-blades
LoadCapacity : 550 pound
Manufacturer : Magnate
Material : Metal
ModelName : Chenxin's Store
ModelNumber : Chenxin's Store
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : M167M114V5
ProductDescription : All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods ( especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.
ProductSiteLaunchDate : 2019-12-23T23:29:24.510Z
Size : 3pcs
Style : Compact
UnitCount : 1