Cart 2 india

Specification
Brand : MAGNATE
BulletPoint1 : 0.042" Thickness; To be used to cut 1-in to 6-in (taller if fed slow) wood or 3-in to 11-in steel
BulletPoint2 : 13 ft. 11 inch Long
BulletPoint3 : ☂ Applicable Smooth Transition Height 1.57 in: Perfect suitable for the threshold transition where the height difference between the carpet/floor/door/carpet/tile and the ground is within 2 cm (0.78 inch) to 4 cm (1.57 inch)
BulletPoint4 : ☂ Easy to Cut & Install The floor strip is easy to install, no need to punch, no need to tighten screws, simple installation, you can adjust the height and length of your own use.
BulletPoint5 : ☂ Suitable for Any High Traffic Area: Our edging trim strip level out possible differences of levels like of vinyl planks, concrete floor, tile, LVT, hardwood floor, laminate, sweeping robot ramp etc.
Color : One Color
CompatibleMaterial1 : Metal
CompatibleMaterial2 : Leather
CompatibleMaterial3 : Wood
CompatibleMaterial4 : Alloy Steel
ExternallyAssignedProductIdentifier : 8144691637663
ExternallyAssignedProductIdentifier1 : 0764968993001
ExternallyAssignedProductIdentifier2 : 764968993001
ItemDisplayDimensions_Length : 4 inches
ItemDisplayWeight : 3.12 pounds
ItemName : Magnate M167E114V2 Carbide Tipped Bandsaw Blade, 167" Long - 1-1/4" Width, 2-3 Variable Tooth
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : band-saw-blades
LoadCapacity : 550 pound
Manufacturer : Magnate
Material : Carbide Tipped
ModelName : Chenxin's Store
ModelNumber : Chenxin's Store
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : M167E114V2
ProductDescription : This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts and an excellent finish. The new high performance steel back offers excellent fatigue life. A carbide tipped blade outlasts carbon steel and bi-metal blades when cutting abrasive non-ferrous materials, wood; especially tropical hardwoods i.e. ebony, koa or cocabolo. When using a metal cutting bandsaw, it is also ideal to cut ferrous metal materials at least 1 inch thick, i.e. alloy steels, tool steels, bearing steel, carbon steels, stainless steels, and mold steels. Magnate carbide tipped bandsaw blades application notes: 1) To cut up to 6" (taller if fed slow) wood or 1” – 4” steel : Use blades of 1/2" wide x 3 TPI, 3/4" wide x 3 TPI, or 1” wide x 3 TPI. 2) To cut up to 6" (taller if fed slow) wood or 3” – 11” steel : Use blades of 1" wide x 2-3 variable tooth or 1-1/4" wide x 2-3 variable tooth. 3) To cut up to 4" (taller if fed slow) wood or 1” – 6” steel : use blades of 1-1/4" wide x 3-4 variable tooth; 4) To cut wood up to 3" and taller : Use blades of 1" wide x 1.3 TPI. ( for Woodcutting Only ) 5) To cut wood 2" to 6” : Use blades of 1" wide x 2 TPI. ( for Woodcutting Only ). All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.
ProductSiteLaunchDate : 2019-12-23T23:29:23.963Z
Size : 3pcs
Style : Compact
UnitCount : 1