Cart 2 india

Specification
Brand : MAGNATE
BulletPoint : 8' 11" (8 feet 11 inch) Long, Med-Coarse, Cuts 1/4" or Thicker Abrasives & Hardened Material
ExternallyAssignedProductIdentifier1 : 0764968891239
ExternallyAssignedProductIdentifier2 : 764968891239
ItemDisplayDimensions_Length : 2 inches
ItemDisplayWeight : 1.03 pounds
ItemName : Magnate M107G34MG Carbide Grit Gulleted Bandsaw Blade, 107" Long - 3/4" Width, 0.032" Thickness
ItemTypeKeyword : band-saw-blades
Manufacturer : Magnate
Material : Carbide Grit
PartNumber : M107G34MG
ProductDescription : This blade is NOT used for woodcutting, but it MUST be used with a wood cutting band saw. DO NOT use a metal-cutting band saw with it. It cuts abrasive and hardened materials such as wire-reinforced rubber, steel belted radial tires, ceramics, fiberglass, composites, hardened steel, cast iron (grey with voids), graphite, and case-hardened materials. A gulleted carbide grit bandsaw blade is ideal for cutting 1/4" (6.4mm) or thicker materials; while a continuous blade is ideal for cutting 1/4" (6.4mm) or thinner materials. All bandsaw blades carried by Magnate (TM) are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. If the teeth of the bandsaw blade are pointing in the opposite direction of your machine, flip the blade inside out. Warning: For packaging purposes, this blade is folded into a coiled position similar to a spring and may pop open during coiling or uncoiling. Wear heavy-duty leather gloves and eye/body protection, and exercise extreme caution when handling the blade. Failure to do so could result in serious bodily injury. Refer to your bandsaw owner's manual for further safety instructions. Please consult your owner's/operation manual to ensure that the blade's length, width, and thickness are compatible with your bandsaw machine.
ProductSiteLaunchDate : 2024-05-26T06:56:21.762Z