Cart 2 india

Specification
Brand : Lenox
BulletPoint : 5' 2" (5 feet 2 inch) Long; 0.025" Thickness
BulletPoint1 : Tri-Master tooth design with triple-chip grind for smooth cuts and a fine finish
BulletPoint2 : Carbide-tipped teeth for cutting wood, mold steel, carbon steel, tool steel, alloy steel, bearing steel, stainless steel, titanium alloys, nickel-based alloys, and aluminum and other nonferrous metals
BulletPoint3 : Good for cuts in solid shapes
BulletPoint4 : Choice of variable pitch for reducing noise levels and vibrations, or constant pitch for general-purpose cutting
BulletPoint5 : Steel backing for fatigue resistance
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Stainless Steel
CompatibleMaterial3 : Metal
CompatibleMaterial4 : Aluminum
CompatibleMaterial5 : Stone
CompatibleMaterial6 : Carbon Steel
CompatibleMaterial7 : Wood
CompatibleMaterial8 : Alloy Steel
CustomerPackageType : Frustration-Free Packaging
ExternallyAssignedProductIdentifier1 : 082472450583
ExternallyAssignedProductIdentifier2 : 0082472450583
IncludedComponents : Industrial HVAC;motor-accessories;
ItemDisplayDimensions_Length : 9 inches
ItemDisplayWeight : 0.39 pounds
ItemName : Lenox Tri-Master Versatile Band Saw Blade, Carbide Tipped, Regular Tooth, Triple Chip Set, Positive Rake, 162" Length, 1" Width, 0.035" Thick, 3 TPI
ItemPackageDimensions_Height : 6.858 centimeters
ItemPackageDimensions_Length : 50.038 centimeters
ItemPackageDimensions_Width : 49.784 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : band-saw-blades
Manufacturer : LENOX, Newell Rubbermaid
Material : Carbide
NumberOfItems : 1
NumberOfTeeth : 3
PartNumber : 45058TRB134115
ProductDescription : Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material. All bandsaw blades carried by Magnate (TM) are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. If the teeth of the bandsaw blade are pointing in the opposite direction of your machine, flip the blade inside out. Warning: For packaging purposes, this blade is folded into a coiled position similar to a spring and may pop open during coiling or uncoiling. Wear heavy-duty leather gloves and eye/body protection, and exercise extreme caution when handling the blade. Failure to do so could result in serious bodily injury. Refer to your bandsaw owner's manual for further safety instructions.
ProductSiteLaunchDate : 2011-11-17T08:00:01.000Z
Size : 13' 6"
Style : Regular Tooth
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112700