Cart 2 india

Specification
Brand : Smart Packs by OCSParts
BulletPoint1 : Genuine Oetiker® Clamps
BulletPoint2 : Two ears for nearly double the clamping range of one-ear clamps
BulletPoint3 : Applies uniform force for secure clamping
BulletPoint4 : Two-ear clamps accommodate thermal and vibrational expansion for a surer hold than other clamp types
BulletPoint5 : OCSParts Smart Pack Series - An economical and convenient way to purchase quantities needed
Color : One Color
ExternallyAssignedProductIdentifier : 8938215638867
ExternallyAssignedProductIdentifier1 : 765629761557
ExternallyAssignedProductIdentifier2 : 0765629761557
ExternallyAssignedProductIdentifier3 : 00765629761557
ItemName : Stainless Steel Hose Clamp, Double Ear, 0.394" Band Width, 1-1/16" Hose ID, 24 mm - 28 mm Hose OD Range, Oetiker Part 15100015 (Pack of 50)
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : band-hose-clamps
Manufacturer : OCSParts
Material : Stainless Steel
ModelName : TeamSkyysugfknaqg
ModelNumber : 15100015-50
NumberOfItems : 50
PartNumber : 15100015-50
ProductDescription : Dixon Style K Series Preformed Band Clamps are from their K Series of center punch bandclamps. These center punch hose clamps are compatible with the F1, F40, and F100 Band Clamp Hand Tools (other manufacturer punch style tools may also be used), as well as the 51960 Clamping Tool w/ 51960 Adapter. The uniquely designed K Clamp can be locked by a wide variety of manufacturer's tools. K Series Band Clamps come pre-formed in a given diameter with the tailpiece already through the buckle and must be slipped over the hose end before the fitting is inserted. These clamps are available in Galvanized Steel or Stainless Steel (300 Series Band, 302 Series Buckle) and feature a punch indentation for ease of center punching. Sold in package quantities only, quantity varies with size of clamp. Please reference chart below for bandwidth and package quantity for these Open End Dixon Center Punch Band Clamps.

The use of band style clamps is a proven method of retaining hose couplings in industrial hose applications. To achieve proper retention and sealing of the hose coupling in the hose, it is imperative that these clamps be installed correctly. Please follow the manufacturerÃs recommendations as to the proper selection and installation of band clamps. When installing multiple clamps the buckles must be offset around the hose, eliminating the possibility of a straight line leak under the buckle area.

The first clamp should be installed just inside the mark on the hose furthermost from the hose end (reference page 11). Leaving excess band material turned back over the buckle does not improve the performance of the clamp. In fact, a safety hazard develops from this practice by leaving sharp edged material exposed.
ProductSiteLaunchDate : 2016-07-15T16:16:03.377Z
Size : Pack of 50
SpecificUsesForProduct : Professional
Style : Modern
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 50
UnspscCode : 31162900