SharkBite Max 1/2 Inch x 1/2 Inch Ball Valve with FNPT Connector, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR22182A

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 4200/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : SharkBite
BulletPoint1 : FAST AND EASY INSTALL: SharkBite Max push-to-connect brass push ball valves are perfect for making quick transitions between a FNPT threaded end to a PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipes in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
BulletPoint2 : NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
BulletPoint3 : STRONG AND DURABLE: The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
BulletPoint4 : LEAD FREE: This ball valve is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
BulletPoint5 : CERTIFIED: Ball valves with FNPT connectors are rated to 200 degrees F and 250 PSI with 2K maximum burst
BulletPoint6 : If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
Color : SharkBite Max
ConnectorType : Adapter
ConnectorType1 : Threaded
ConnectorType2 : Spigot
CustomerPackageType : Standard Packaging
ExteriorFinish : Copper,Stainless Steel
ExteriorFinish1 : White
ExteriorFinish2 : PVC
ExternallyAssignedProductIdentifier1 : 697285069381
ExternallyAssignedProductIdentifier2 : 0697285069381
ExternallyAssignedProductIdentifier3 : 00840194118781
FinishType : Polished
IncludedComponents : 1/2 Inch x 1/2 Inch Ball Valve with FNPT Connector
IncludedComponents1 : Nut
IncludedComponents2 : Washer
ItemDisplayDimensions_Length : 4 inches
ItemDisplayWeight : 1 pounds
ItemName : SharkBite Max 1/2 Inch x 1/2 Inch Ball Valve with FNPT Connector, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR22182A
ItemPackageDimensions_Height : 19.8 centimeters
ItemPackageDimensions_Length : 3.7 centimeters
ItemPackageDimensions_Width : 10.2 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : industrial-ball-valves
Manufacturer : Reliance Worldwide Corporation
Material : Brass,Copper,Cpvc,Pex
Material1 : Stainless Steel
Material2 : Brass
MaximumOperatingPressure : 200 pounds_per_square_inch
MetalType1 : Stainless Steel
MetalType2 : Brass
ModelName : Brass Push Female Ball Valve
ModelNumber : UR22182A
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 5
NumberOfPorts : 2
PackageLevel : unit
PartNumber : UR22182A
ProductDescription :
From the Manufacturer

All metal pieces of our valves are 304 Stainless steel, including the nuts and other exterior metals. Other manufacturers cut costs by using 201 Stainless steel on these parts which results in a rusty looking Valve over time. DERNORD manufacturers its 2-piece ball valves with all 304 Stainless steel parts so you can be sure there won't be any rust formation from external air or water exposure over time. Available in both Wog200 and Wog1000. Wog200 are considered ideal for most general applications. Wog1000 are for high pressure and industrial applications where of the Valve are preferred.


The complete kit includes a weldless bulkhead assembly to convert any kettle or converted keg (kegler) without welding, includes Instructions. It has standard 2 piece full port valve, and 3/8" hose barb. Fits into 13/16" drilled hole in kettle or keg wall. All fittings are 304 stainless steel, 1/2" NPT thread.A full coupler has been added in the back of the spigot to allow for the addition of any 1/2" Male NPT fitting you need - barb, Compression fitting, etc.

The complete kit includes a weldless bulkhead assembly to convert any kettle or converted keg (kegler) without welding, includes Instructions. It has standard 2 piece full port valve, and 1/2" hose barb. Fits into 7/8" drilled hole in kettle or keg wall. All fittings are 304 stainless steel, 1/2" NPT thread.

It features a 1/2" Full Port ball valve and a 3/8" barb, allowing your wort to pass through unrestricted. A full coupler has been added in the back of the spigot to allow for the addition of any 1/2" Male NPT fitting you need - barb, Compression fitting, etc.

ProductSiteLaunchDate : 2023-05-11T23:01:58.263Z
Size : 1/2 in. x 1/2 in.
SpecificationMet : multiple certifications
Style : SharkBite Max
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600
ValveType : Ball Valve
Voltage : 12 volts
Wattage : 5 watts

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.