Specification Brand : VALCON BulletPoint1 : Easy to install BulletPoint2 : Package Dimensions: 8.89 H x 2.54 L x 5.334 W (centimeters) BulletPoint3 : Package Weight: 0.3 pounds BulletPoint4 : Country of Origin : South Korea BulletPoint5 : Works with All Kinds and Brands Pex Tubing Color : Brass ConnectorType : Mnpt ControlMethod : remote ExteriorFinish : Brass ExternallyAssignedProductIdentifier : 00810173296991 ExternallyAssignedProductIdentifier1 : 742979512015 ExternallyAssignedProductIdentifier2 : 0742979512015 ExternallyAssignedProductIdentifier3 : 00742979512015 IncludedComponents1 : Actuator IncludedComponents2 : Valve Body IncludedComponents3 : User Manual ItemDisplayDimensions_Length : 6 inches ItemDisplayWeight : 1 pounds ItemName : Motorized Ball Valves – 1" Ball Valve with 12~24V DC and 2 Wire Auto Return Setup by VALCON (SUS 304, 1 Inch) ItemPackageDimensions_Height : 9.45 inches ItemPackageDimensions_Length : 6.7 inches ItemPackageDimensions_Width : 4.33 inches ItemPackageQuantity : 1 ItemShape : Inline ItemTypeKeyword : industrial-ball-valves Manufacturer : VALCON Company, Limited Material : SUS 304 Material1 : Plastic Material2 : Stainless Steel MaximumOperatingPressure : 600 pounds_per_square_inch ModelName : AT-2TC/25S ModelNumber : AT-2TC/25S NumberOfItems : 1 NumberOfPorts : 2 PartNumber : 51201 ProductDescription : Actuator Control: DC forward reverse control, Power ON/OFF control Power: DC 12V ~ DC 24V / 1A (free volt) Consumption Power: Approx. 1.3W (in no-load operation) Standby Power: Approx. 0.2W (in completed) Max. Output torque: 40Kgf‧cm Weight: Approx. 300g Operating time: Approx. 4sec (90° operating basis) Rotation Direction: Closes clock-wise / Opens Counter-clock-wise / (TOP VIEW) Mechanical Life Span: Approx. 100,000 Cycles Operation Environment: indoor with no condensation Operation Temperature (Humidity): -15℃~50℃ (35 ~ 85% RH) Ball valve Apply to B/V: 25A Ball valve Max. Operating Temp: SUS 304 [0℃ ~ 120℃ (32℉ ~ 248℉)] Max. Operating Pressure: 10㎏f/㎝²(142PSI) Application Fluid : Non-Corrosive Liquid & Gas ※When power is applied for the first time after installation, the electric actuator charges for about 3 minutes.[Conducted only once for the first time]※It automatically closes when the power is cut off. If manual operation is required, press and hold the manual button for about 3 minutes to complete the internal discharge and operate manually (However, if the automatic closing function is lost due to damage to the electric actuator, manual operation is possible freely) ※Do not connect black wires to the red wireInstallation Specifications 1. Compose system that can control by Close-operating Red(DC 12~24V + conductor), black (DC 0V - conductor) or Power cut off (in case of power failure) / Open-operating Red (DC 0V - conductor), black (DC 12~24V - conductor) 2. Install actuator vertically to valve that is established in piping line 3. Attach the power supply unit with a switch or disconnecting device for emergency power off 4. Connect an overcurrent cut-off device to the power supply for circuit protection ProductSiteLaunchDate : 2021-09-28T13:45:24.101Z Size : 1 Inch SpecificationMet : NSF StreetDate : 2018-07-30T00:00:01Z Style : Resistant to Corrosion Due to DZR Brass,ASTM F1807 Certified SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1 UnspscCode : 40141600 ValveType : Ball Valve