Cart 2 india

Specification
Brand : HSH-Flo
BulletPoint1 : ◎2 Way 1/4" NPT Full Bore 8mm Brass Valve Body;
BulletPoint2 : ◎Limit Switches Bulid-In, Auto Cut Off Current When Arrived At Place(0Ma);
BulletPoint3 : ◎Wide Range Working Voltage Design, Work From 9-24VAC And 9-36VDC;
BulletPoint4 : ◎2 Wires Control Normally Closed Design And Installed With Position Feedback Wires;
BulletPoint5 : ◎Build In Capacitor Return, Will Return To Original Position When Power Off/Power Failed;
Color : As Picture Show
CustomerPackageType : Standard Packaging
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 756740755129
ExternallyAssignedProductIdentifier2 : 0756740755129
IncludedComponents1 : Actuator
IncludedComponents2 : Valve Body
ItemName : HSH-Flo Brass 2 Way 1/4" DN8 NPT 9-24VAC/DC Normally Closed Position Feedback Motorized Electrical Ball Valve
ItemPackageDimensions_Height : 4.33 inches
ItemPackageDimensions_Length : 3.15 inches
ItemPackageDimensions_Width : 3.15 inches
ItemPackageQuantity : 6
ItemTypeKeyword : industrial-ball-valves
Manufacturer : SuZhou HSH-Flo Equipments Co.,Ltd
Material : Aluminum
Material1 : Plastic
Material2 : Brass
MaximumOperatingPressure : 145 pounds_per_square_inch
ModelName : A20-T8-B2-B
ModelNumber : 1/4 inch
NumberOfItems : 1
NumberOfPorts : 2
PartNumber : B2-X08N-502B
ProductDescription :

Technical Parameters:
◎Valve Body Diameter: 1/4 inch NPT;
◎Valve Body Material: Brass;
◎Actuator Material: Engineering Plastics;
◎Sealing Material: FKM and PTFE;
◎Wiring Diagram: CR502-B (Electircal Singal Position Feedback Auto Return When Power Off);
◎Working Voltage: AC/DC9-24V;
◎Working Current: ≤500mA;
◎Working Medium: Fluid, Air;
◎Working Pressure: Max 145 Psi;
◎Switching Time: ≤5s;
◎Life Time: 70000 times (Testing pressure is 0.4MPa, medium is water)
◎Actuator Rotation Angle: 90°;
◎Torque Force: 3N.m.;
◎Cable Length: 0.5m;
◎Environment Temperature: -15℃ ~ 50℃;
◎Liquide Temperature: 2℃ ~ 90℃;
◎Switch Indicator: YES
◎Manual Override: YES;
◎Protection Class: IP67

Application:
◎HVAC;
◎Water Treatment;
◎Chemical Process;
◎Air Compressor Drainage;
◎Automatic Control System;
◎Solar Hot Water Engineering;
◎Watering Flowers, Regular Humidification;
◎Air Conditioning Automatically Humidifies;
◎Automatic Control Of Small Industrial Equipment;
◎Environmental Protection, Efficient Water-saving;
◎Replace Solenoid Valve (Especially when solenoid valve cannot work reliably);

Manual Override Instructions:
◎In case of anelectric supply failure, it is possible to operate the actuator manually.
◎Power must in off position when start the manual override.
◎Gently putt up the knob about 3mm, then revolve the knob around left and right to control the valve open or close.
◎When the red needle in the indicator pointing to "S", means the valve is closed; When pointing to "O", means the valve is open.
◎After finish the manual override operation, must press down the knob, so that for the normal electric operation.

ProductSiteLaunchDate : 2024-05-27T02:10:29.172Z
Style : SS304-1''-CR2-02-Plug
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600
ValveType : Ball Valve