Cart 2 india

Specification
Brand : DERPIPE
BulletPoint1 : Plumbing Fitting Valve Connector Type: 1/2 inch to 1/2 inch, 1/4 turn on/off
BulletPoint2 : Plumbing Fitting Valve Material: brass-plastic. Acceptable temperature up to 200¡ãF (93¡ãC)and works 200PSI
BulletPoint3 : Plumbing Fitting Valve Feature: the single lever control is easy to operate and rotate after installation, makes it reach the shutoff or work in tight spaces easier, which is flexible and space-saving
BulletPoint4 : Push Fit Ball Valve Application: Certified for potable Water and hydronic applications, fits copper tubing, CTS CPVC and PEX, can connect all three types in any combination. Mainly used in pipe fixing system
BulletPoint5 : Push Fit Ball Valve are easy to install, no special tools, soldering, compression or glue is required for plumbing fitting joint, and the special o-ring compresses offer good seal property
ExteriorFinish : Copper
ExternallyAssignedProductIdentifier1 : 0098268343403
ExternallyAssignedProductIdentifier2 : 098268343403
ItemName : Ball Valve – Push Fittings 1/2 Inch, Water Valve Shut Off, Push-to-Connect Fittings, PEX, Copper, CPVC
ItemPackageDimensions_Height : 11.7094 centimeters
ItemPackageDimensions_Length : 8.9916 centimeters
ItemPackageDimensions_Width : 9.6012 centimeters
ItemPackageQuantity : 1
ItemShape : Inline
ItemTypeKeyword : industrial-ball-valves
Manufacturer : DERPIPE
Material : Brass
ModelNumber : QW80043X
NumberOfItems : 1
NumberOfPorts : 1
PartNumber : QW80043X
ProductDescription : Ball Valves are one of the easiest way to install or replace a shut-off valve into your potable water or hydronic water heating system. The single lever control is easy to operate and rotate after installation, makes it reach the shutoff or work in tight spaces easier, which is flexible and space-saving.
The full-port ball valve allows water to pass through the valve easily and freely, and has a reliable option to quickly close the water supply. Installing new valves or repairing leaking pipes is quick and convenient. When you insert a tube into the fitting , the stainless steel teeth will bite the tube and the special o-ring compresses offer good seal property, which is easy to connect and the pipe can even be twisted after everything is connected. You can easily change the tubing connector direction. Narrow space is also suitable with the push.

Product Features:
1. Inspector friendly; peace of mind
2.Rated up to 200 degrees and 200 psi
3. Integral pipe liner for PEX installations
4. Fits copper tubing, and CTS CPVC and PEX
5. Lead free DZR brass body resistant to corrosion
6. Designed for potable water and radiant heating
7. Approved to be used underground and behind walls without access to panels

CAUTIONS:
1.After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint.
2.Do not use outside the service temperature range to prevent deformation of the sealing material and easy leakage.
3.Do not use it in places where metal powder or sand dust is mixed, such as adhesion of other materials may cause poor work or leakage.
4.When inserting the pipe, it must be inserted into the bottom of the joint. Failure to insert the pipe into the bottom may lead to air leakage.
5.Make sure that the cutting surface of the pipe is vertical, there is no scar on the outer circumference of the pipe and the pipe is not oval.
ProductSiteLaunchDate : 2019-10-06T07:00:00.000Z
Size : 1/2 Inch
SpecificationMet : reach
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : Ball Valve