Cart 2 india

Specification
Brand : FANOVO
BulletPoint1 : PVC MATERIAL:PVC Piping Systems Feature Improved Performance, Increased Safety, high strength, and Better Rust and Corrosion Resistance when Compared with Steel Piping Systems and less weight than fittings made from metal, saving cost and accelerating the project for the easy installation
BulletPoint2 : T-HANDLE:T-handle for manual on/off control, easy operation, Enables Rapid and Safe Flow Control in Your Water Pipes, seats and stem packing reduce the risk of leakage,Not Recommended for Potable Water
BulletPoint3 : PERFORMANCE: This PVC Ball Valve fitting has a maximum operating pressure of 150 PSI at 73 degrees Fahrenheit
BulletPoint4 : EASY TO USE:Each valve is individually tested for maximum safety blow-out proof stem, aging resistance, and long service life.Valve body material: U-PVC.Water flow temperature: - 15 ℃ - 40 ℃, the Connection method of water pipe: glue bonding
BulletPoint5 : APPLICATION: PVC Ball Valve fitting is suitable for use as an inline valve for connecting two pipes going in the same direction and the ball valve uses a spherical disc to control the flow between pipes, tubes, or hoses. suitable for indoor and outdoor use like with cess-pipe, landscape and irrigation, pool, cold water, venting, waste applications, aquaculture, and other applications. and general-purpose applications
ConnectorType1 : Slip
ConnectorType2 : Socket
ExteriorFinish : Metal,Steel
ExternallyAssignedProductIdentifier1 : 730851399205
ExternallyAssignedProductIdentifier2 : 0730851399205
ItemName : 2 inch Inline Slip PVC Ball Valve Schedule 80 Compact T-Handle Water Shut-Off Valves Octagonal Ball Valve Socket Valve for Irrigation and Water Treatment Swimming Pool Equipment (2 inch, 1)
ItemPackageDimensions_Height : 16.6116 centimeters
ItemPackageDimensions_Length : 8.89 centimeters
ItemPackageDimensions_Width : 13.589 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-ball-valves
Manufacturer : FANOVO
Material : Pvc
MaximumOperatingPressure : 150 pounds_per_square_inch
NumberOfItems : 1
NumberOfPorts : 2
ProductDescription : Wide Application
Suitable for use in a variety of plumbing and industrial applications, these compact PVC ball valves are equipped with a non-threaded end.
Crafted of a combination of sturdy plastic and chrome, they will not easily crack or break. And corrosion-resistant, they are also lightweight and easy to install.
Application:Water project in construction,Water treatment for swimming pool,Water project in pisciculture,Irrigation for agriculture.
Specification:
Material: PVC/PP
Color:As the picture shows
Size: As the picture shows
High Working Pressure: 150 PSI at 73 degrees Fahrenheit
End Connection:Socket
Package includes:
1 x Compact T-Handle Water Shut-Off Valves
Features:
1.Easy to install to and working with tank or soft tank.
2.Durable PVC body and rugged PP handle.
3.Simple quick tightening joint ensure fast and safe connections.
4.Low Torque, easy to operate.
How easy to use:
First step, clear both end of the valve
Second step,For socket type, there need to use the corresponding glue on the socket wall again with the pipe and stick them together
NOTE
The knob of the plastic ball valve needs to be unscrewed in a clockwise direction along the groove. The larger size of the plastic ball valve requires more force to unscrew the knob switch for better sealing. Of course, you can also use a tool to unscrew the knob. To help rotate, or you can try to use a hot air blower to heat around the ball valve body, and then twist. 1. You can use a wrench if the plastic valve can’t be screwed. The valve cannot be fully stressed by hand. Using a wrench can use the lever principle to increase the valve’s stress.
2. Or smear lubricating oil on the plastic valve interface, and then turn the valve.

ProductSiteLaunchDate : 2021-09-01T08:25:59.561Z
Size : 2 Inch
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 12
UnspscCode : 60141001
ValveType : Ball Valve