Cart 2 india

Specification
Brand : Mssoomm
BulletPoint1 : Bidirectional ballscrew diameter: 32mm; Lead / Pitch: 10mm; Total length: 78.74 inch / 2000mm; 2 ball screw Nuts + BK/BF25 End Bearing support block with locknut and circlip + Flexible Coupling. There are 20mm reserved for the middle connection and 10mm reserved for both ends
BulletPoint2 : The bi-directional ball screws move 2 ball screw nuts in opposite directions with higher precision, which overcomes the synchronization error excellently caused by the 2 motors. The left-handed / counterclockwise and right-handed / clockwise thread lengths are equal in default, if not, please tell us
BulletPoint3 : No stick-slip effect, low friction, low operation noise, heats up less, reduce driving power required, and make service life longer
BulletPoint4 : Under high standard design and manufacture, the bi directional ball screw is with good anti backlash performance, make the transmission system more precision
BulletPoint5 : Right and left hand ball screw model includes SFU1204, SFU1605, SFU1610, SFU2005, SFU2505, SFU2510, SFU3205, SFU3210, and SFU4005. All kinds of customization needs ( customized the coupler bore and so on) and technical support ( CAD and STEP 3D files are available ), please contact us
ItemName : Mssoomm 32mm Bi Directional Ball Screw Left and Right Hand Ballscrew SFU3210 Length 78.74 inch / 2000mm + 2 Ball Screw Nuts + Coupler/Coupling + BK/BF25 Bearing Support Block for CNC
ItemTypeKeyword : ball-screws
Manufacturer : Mssoomm
Material : Alloy Steel
NumberOfItems : 1
PartNumber : MS-ZYX-SFU3210-L2000MM-NSC
ProductDescription : Specifications:
Brand: Mssoomm
Manufacturing Process: Rolled Thread
Precision: C7 Grade, also with C5 ground provided, if need, please contact us
Material: GCr15 steel
Model: SFU3210
This package includes:
- 1Pcs bi-directional Ball Screw SFU3210 RM3210 32mm Length 78.74 inch / 2000mm
- 2Pcs Ball Screw Nuts
- 1Pcs BK/BF25 End Bearing Block Supports ( The bearing in the BK 25 is deep groove ball bearing, if you need angular contact bearing, pls tell us) with locknuts and circlips
- 1Pcs Flexible Coupler ( The standard bore diameter of the coupling which matches the motor shaft is 18mm, if your motor is other size, pls tell us )

Customization and Technical Support:
1. By default, the left-handed and right-handed thread lengths are equal. If you have customized length requirements, pls tell us. There will be 20mm reserved for the middle connection and 10mm reserved for both ends. Please consider this when choosing the length of the ball screw..
2. If you need end machining according to your drawings, please tell us before order.
3. As a professional seller, we can provide complete information of the products.（Contains CAD drawings and 3D modeling files）.

Ball Screw Maintenance:
A ball screw must be properly lubricated and kept clean at all times. Before you apply any lubrication, whether you choose grease or oil, make sure the ball screw is thoroughly clean and dry. We recommend lubricating ball screws with a normal workload every six months and ball screws with a heavy workload every three months. The specific type of lubrication for a Ball Screw depends on various factors.
- Light loads and high speeds do well with a machine oil or low viscosity grease.
- Medium loads and speeds do well with NLGI 1 or 2 grease.
- High loads may require a grease with an EP2 additive.
ProductSiteLaunchDate : 2022-11-28T09:53:43.492Z
Size : 78.74 inch / 2000mm
Style : SFU3210 NSC
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111500