Description
This is an electric sealing machine for sealing all types of composite and aluminum plastic tubes. Its high-quality stainless steel heating tube and copper heating block provide you with 30 watts of heating power and a sealing speed of 5-20 pieces/min, which can greatly improve the speed and quality of sealing.
Details
Anti-slip Feet: The bottom has four anti-slip feet not only can effectively fix the machine to prevent slipping but also can protect the floor from being scratched.
Copper Heating Block: Thick heating block made of copper has excellent thermal conductivity and can be heated quickly to achieve a better sealing effect.
Wider and Longer Chute: The wider and longer chute can accommodate hoses with diameters of 0.31-2.16in and lengths of 2.36-8.66in, making it suitable for a wide range of sealing sizes.
Specification
Model: DF-20
Material: 304Stainless Steel, Copper
Color: Silver
Power: 30W
Voltage: 110V
Air Pressure: 0.4mpa
Sealing Speed: 5-20pieces/min
Adjustable Temperature: 0-300℃
Process: Wire Drawing
Sealing Type: Electric Heating
Clamp Pattern: Vertical Type
Diameter of the Suitable Soft Pipe: 8-55mm /0.31-2.16in
Length of the Suitable Soft Pipe: Less Than22cm /8.66in
Wideness of the Suitable Soft Pipe: Less Than 8cm/3.14in
Gross Weight: 21kg/46.29lbs
Net Weight: 19kg/41.88lbs
Package Size: 43x32x61cm/16.92x12.59x24.01in
Product Size: 35x28x55cm/13.77x11.02x21.65in
Package Included
1xElectric Sealing Machine
2xHeating Pipes
1xEnglish Manual
All Accessories Needed for Use
Notes
1.The product is only applicable to composite pipes and aluminum-plastic pipes not applicable to plastic pipes.
2.Please use high-temperature resistant items hose for sealing. The sealing temperature should be adjusted appropriately according to the type of material to achieve a better sealing effect.
3.Please check the clamps frequently for looseness. Lubricate with a small amount of lubricant.
4.Please check often if the heat insulation cloth on the heater is damaged or if soft things are sticking to it. Replace the cloth with a new one or clean the stain.
5.Turn off the machine when the clamp is in the separated state after operation to keep the spring flexible.
6.When the machine is not in use, cover it with a cloth.
7.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.