Cart 2 india

Specification
Brand : Sturdy Built
BulletPoint1 : Hub Face measures 95 inches - Hub Face measures from the face of one hub to the face of the other hub (the face is where the wheel meets the hub).
BulletPoint10 : Comes with castle nut and cotter key.
BulletPoint2 : Overall length measures 101 inches tip to tip.
BulletPoint3 : Will safely accommodate a spring seat center of 78 inches - Spring Center is measured from the center of one spring to the center of the other, across the axle.
BulletPoint4 : Features the EZ-Lube system.
BulletPoint5 : Comes with weldable spring seats to mount your axle with the a-appropriate U-bolt kit - No more drilling!
BulletPoint6 : 3 inch diameter Heavy Duty 3/16 inch thick tubing.
BulletPoint7 : Inner Bearing Surface: 1 3/4" ( Most commonly accommodates a 25580 Bearing Number)
BulletPoint8 : Outer Bearing Surface: 1 1/4" ( Accommodates the following Bearing Numbers: 15123, 67048, and 14125A)
BulletPoint9 : Grease Seal: 2.25" Grease Seal Surface
Color : Black
CompatibleWithVehicleType : Trailer
ExternallyAssignedProductIdentifier1 : 733781137220
ExternallyAssignedProductIdentifier2 : 0733781137220
FinishType : Powder Coated
FitType : Universal Fit
IncludedComponents : (1) Trailer Drop Axle Beam 95" Hub Face Weld On Spring Seats
IncludedComponents1 : 1x Axle Tube with all parts installed and ready to mount which includes the following
IncludedComponents2 : 2x Idler Hub
IncludedComponents3 : Full Set of Bearings and Races
IncludedComponents4 : 2x Double Eye Springs
IncludedComponents5 : Tie Plates, U-Bolts and all other components.
IsAssemblyRequired : 1
ItemName : Sturdy Built 7000lb Capacity Trailer Drop Axle 95'' Hub Face Adjustable Spring Seat, Black (22153)
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 105 inches
ItemPackageDimensions_Width : 5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : trailer-axles
Manufacturer : Sturdy Built
Material : Steel
ModelName : (1) 7000lb Capacity Trailer Drop Axle 95" Hub Face Adjustable Spring Seat
ModelNumber : 22153
NumberOfItems : 1
OeManufacturer : Rockwell American
PartNumber : 22153
ProductDescription : This 7,000lb Capacity Drop Trailer axle is intended to replace your broken or bent axle on your trailer. A 7,000 lb Capacity Trailer Axle Beam is most commonly used on trailers that are running 6 Lug or 8 Lug Brake Drums or Idler Hubs. This Axle includes standard 5 Hole Brake Flanges welded to the axle beam for mounting Drum and Disc Brakes. You would need a replacement axle if you have noticed tread wear due to improper tire alignment, which is the result of a bent trailer spindle on one side. In addition, another common reason for axle damage results from over loading the trailer, which will result in noticing tread wear on the insides of both trailer tires. If you trailer experiences exposure to corrosive environments, such as a boat trailer, rust damage is another possible culprit for axle replacement. This 7,000 lb Capacity Trailer Axle is made with 1/4" Steel Wall Thickness, measures 3" in diameter, and features #42 Drop Spindles welded into the beam. This listing is for the Beam Only. This Axle is for trailers with a Leaf Spring Suspension. We offer all additionally needed components separately for you to build the exact axle kit that you are needing for your trailer. Drop Axles Feature a 4" Drop in the Spindle. The Spindle Itself drops, and then is welded into the Axle Beam. Typically Drop Axles are used on heavy duty equipment trailers and car haulers to keep the deck of the trailer as low as possible.
ProductSiteLaunchDate : 2024-11-12T09:22:21.443Z
PullForce : 3500 pounds
Size : 89" Hubface, 74" Spring Center
Style : Drop Idler
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TowingCapacityMaximum : 3500 pounds
UnspscCode : 26111500
WarrantyDescription : 2 Years on Axles