Cart 2 india

Specification
Brand : Zodiac
BulletPoint : Replacement 018-D Vacuum Pool Cleaner Safety Lid for the PV-2100
BulletPoint1 : Compatibility: This pod kit is designed to be compatible with Hayward Navigator cleaner parts. Will Fit for Navigator (all), Pool Vac Ultra (all), Aqua Bug, Diver Dan & Wanda the Whale pool cleaners.
BulletPoint2 : Assembly (Step 1): To remove the pods, first turn the cleaner right side up and, using a flat screwdriver, pry the pod plug off the right pod. This will expose the end of a hex screw that secures the pod to the lower body of the cleaner.
BulletPoint3 : Assembly (Step 2): Using a 1/4" hex socket wench, remove the screw from the pod. You will need a thin wall socket to reach the head of the screw. Keep track of the small washer that is under the head of the screw. It may be stuck at the bottom of the screw hole.
BulletPoint4 : Assembly (Step 3): The pod is attached to the square end of the right A-Frame. Pull the pod off of the end of the A-Frame.
BulletPoint5 : Assembly (Final Step): To attach the new pod, reverse the sequence described above. The pods are marked "R" and "L". Make sure you select the "R" pod. Press the new pod onto the end of the A-Frame. Secure the pod with the hex screw - make sure you include the small washer. Insert the pod plug and tap it in with the end of the screwdriver. Repeat steps 1-4 to replace the left pod.
BulletPoint6 : Easy to install, just need 2 screwdrivers. As another poster stated, the plugs were too small so I reused the old ones. These new pods will last about 2 years in my older pool, based on my last replacement. I originally just purchased the wings and pod shoes, but when I took off the old ones it was clear the pods were shot as well. Next time I will purchase all together.
BulletPoint7 : Tip: if you replace the pod shoes, for easier installation put the shoes on the new pods BEFORE you install. Channel locks work great for this because you have to push hard to get them on. Use a towel over the new shoe, then use the channel lock to squeeze into place. So much easier.
Color : color
ExternallyAssignedProductIdentifier1 : 0768592407330
ExternallyAssignedProductIdentifier2 : 768592407330
IsAssemblyRequired : 1
ItemDisplayDimensions_Height : 2 inches
ItemDisplayDimensions_Length : 7 inches
ItemDisplayDimensions_Width : 2.5 inches
ItemDisplayWeight : 1 pounds
ItemName : Zodiac Baracuda G4 Pool Cleaner Cassette Chamber with Compression Ring Assembly W69563
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 7 inches
ItemPackageDimensions_Width : 2.5 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : swimming-pool-automatic-cleaner-replacement-parts
ItemTypeName : AXV417WHP Pool Cleaner Pod Swing Kit
Manufacturer : Zodiac
ModelName : Pool Cleaner Part Kit with AXV417WHP Pod Swings
ModelNumber : AXV417WHP Pod Swings Pool Cleaner Kit
NumberOfBoxes : 1
PartNumber : W69563
Pattern : Solid
PowerSourceType : manual
ProductDescription : Baracuda G4 Pool Cleaner Cassette Chamber with Compression Ring Assembly
SupplierDeclaredDgHzRegulation : not_applicable