Cart 2 india

Specification
Brand : ATIE
BulletPoint1 : Compatible with Polars 280 Black Max pool cleaner
BulletPoint2 : A hub part that takes the high-pressure water that is fed from the return line via the booster pump and feed hose, then distributes high-pressure water into 280 black max pool cleaner's Sweep Hose, Water Management System K25, and Turbine Drive Shaft assembly C86, creates the driving power, vacuum suction, and sweep power of the pool cleaner
BulletPoint3 : Check the feed pipe every 2 to 3 pool seasons and replace it if there is leak or crack.
BulletPoint4 : Package included: 1 pcs black feed pipe K31 and 1 pcs sweep hose adjust screw B20
BulletPoint5 : Assembly (Final Step): To attach the new pod, reverse the sequence described above. The pods are marked "R" and "L". Make sure you select the "R" pod. Press the new pod onto the end of the A-Frame. Secure the pod with the hex screw - make sure you include the small washer. Insert the pod plug and tap it in with the end of the screwdriver. Repeat steps 1-4 to replace the left pod.
BulletPoint6 : Easy to install, just need 2 screwdrivers. As another poster stated, the plugs were too small so I reused the old ones. These new pods will last about 2 years in my older pool, based on my last replacement. I originally just purchased the wings and pod shoes, but when I took off the old ones it was clear the pods were shot as well. Next time I will purchase all together.
BulletPoint7 : Tip: if you replace the pod shoes, for easier installation put the shoes on the new pods BEFORE you install. Channel locks work great for this because you have to push hard to get them on. Use a towel over the new shoe, then use the channel lock to squeeze into place. So much easier.
Color : Black
CompatibleDevices : Dolphin Nautilus, Dolphin DX, Dolphin Explorer, Dolphin Apollo, Dolphin Wave
ControlMethod : touch
Efficiency : Enhanced Pool Cleaning Efficiency
ExternallyAssignedProductIdentifier1 : 768592407330
ExternallyAssignedProductIdentifier2 : 0768592407330
GpsrSafetyAttestation : 1
IncludedComponents : 9985006-R2
InstallationType : robotic
ItemName : ATIE 280 Pool Cleaner Black Feed Pipe K31 with Sweep Hose Adjust Screw B20 Replacement for Polaris 280 Black Max Pool Cleaner
ItemPackageDimensions_Height : 2.8 inches
ItemPackageDimensions_Length : 9.5 inches
ItemPackageDimensions_Width : 4.4 inches
ItemPackageQuantity : 16
ItemShape : Round
ItemTypeKeyword : swimming-pool-automatic-cleaner-replacement-parts
Manufacturer : Pool Supply Town
Material : Plastic
ModelName : Black Feed Pipe
ModelNumber : PST-K31
NumberOfBoxes : 1
NumberOfItems : 2
NumberOfPieces : 2
PartNumber : PST-K31
PowerSourceType : manual
ProductDescription : This black feed pipe is a hub part that takes the high-pressure water that is fed from the return line via the booster pump and feed hose. It then distributes high-pressure water into 280 Black Max pool cleaner's Sweep Hose B6, Water Management System K25, and Turbine Drive Shaft assembly C86. High-pressure water goes Turbine Drive Shaft assembly to create the driving power of the pool cleaner wheels. High-pressure water also goes into the Water Management System creating a vortex that sucks and pulls up dirt, debris, leaves, and other forms of mulch off of your pool's surface into the filter bag. High-pressure water also goes into the Sweep Hose to scrub and sweep debris from pool floor, walls, corners, and steps. Check the feed pipe every 2 to 3 pool seasons and replace it if there is leak or crack.
ProductSiteLaunchDate : 2024-04-03T04:31:50.951Z
Reusability : Reusable
SpecificUsesForProduct : Pool Maintenance, Pool Repair
Style : 4ps Guide Wheels&2 Pully Gears
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40142000
WarrantyDescription : 2 year
WarrantyType : Limited
WebsiteShippingWeight : 0.34 kilograms