Cart 2 india

Specification
Brand : Totority
BulletPoint1 : Stereo amplifier--the only control is for volume, and it is static when adjusted,audio amplifier
BulletPoint2 : Amplifier speaker--dual output channel of 15w+15w; can be connected to 4 to 8 ohms/ 10 to 50w speakers,audio amplifier
BulletPoint3 : Power amplifier--the volume control is precise and smooth and the speaker connector is a bit lightweight,audio amplifier
BulletPoint4 : Note: it has no case and it doesn't come with a power supply,audio amplifier,stereo amplifier
BulletPoint5 : Stereo amp--blue LED indicator will light on when amplifier power on,audio amplifier
BulletPoint6 : Use: DIY Kits, Car audio, Tractor audio
BulletPoint7 : Easy to install
Color : Multi
IncludedComponents : 1 Amplifier, User Manual
ItemName : Totority Tda7297 Stereo Power Amplifier Module Amplifier Board 15w 15w Output Diy Sound
ItemPackageDimensions_Height : 2.36 inches
ItemPackageDimensions_Length : 2.36 inches
ItemPackageDimensions_Width : 2.36 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-audio-amplifiers
Language : spanish
Manufacturer : Totority
Material : PCB
ModelName : Power Amplifiers
ModelNumber : YD0E4118QOZ5421B18
NumberOfItems : 1
PartNumber : YD0E4118QOZ5421B18
PowerSourceType : Battery Powered
ProductDescription : Package List
1 x Audio Power Amplifier

Characteristics
- Note: It has no case and it doesn't come with a power supply amplifier speaker.
- Chip: TDA7297 Dual-Channel Amplifier Chip power amplifier
- Material: PCB stereo amp
- Power Supply: 9-18V, Recommend 12V 2A
- Output Power: 15W+15W
- Output Impedance:4-8 ohms
- Size: 5.2x4.8x4cm/2.0x1.9x0.9inch
- Efficiency: 90%
- Dual output channel of 15W+15W; can be connected to 4 to 8 ohms/ 10 to 50W speakers stereo amplifier.
- Blue LED indicator will light on when amplifier power on audio amplifier.
- The volume control is precise and smooth and the speaker connector is a bit lightweight.
-
- The only control is for volume, and it is static when adjusted.

Goods Information
amplifier speaker This is a bare bones amplifier.audio amplifier It has a large heat sink and it never shutdowns from overheating.power amplifier level input connector is a standard 1/8" stereo connector, the power and speaker connections use CMM5-2 PCB screw down terminals.stereo amplifier The screw terminals are typical for these of bare amps and are a little weak (so don't over tighten, or solder on some wires).stereo amp The board design is quite simple as of the work is done by the ST Microelectronics 7377 integrated circuit
ProductSiteLaunchDate : 2025-03-27T14:31:45.792Z
Size : medium
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 52161547
Voltage : 12 volts_of_direct_current
Wattage : 200 watts