Cart 2 india

Specification
Brand : Generic
BulletPoint : pema8250.25d 8-Channel Pema 8250 Protea-Equipped Media Amplifier with Dante Digital Interface
BulletPoint1 : 8-in x 8-out sophisticated matrix mixing, 8 built-in mic preamps
BulletPoint2 : Automatic feedback suppression, Ambient noise compensation
BulletPoint3 : 96kHz or 48kHz sample rate, 32-Bit SHARC DSP, 24-Bit A/D–D/A audio resolution
BulletPoint4 : Euroblock connectors for preset recall, DC remote level control and serial data control
BulletPoint5 : Stand-By mode activation via contact closure, Multi-level Security
IncludedComponents : No
ItemName : pema8250.70d 8-Channel Pema 8250 Protea-Equipped Media Amplifier with Dante Digital Interface, 250 Watts Continuous Average Power at 70V, 8 Built-in Mic Preamps, Stereo Sum to Mono
ItemTypeKeyword : electronic-component-audio-amplifiers
Manufacturer : Ashly
ModelNumber : pema8250
NumberOfItems : 1
PartNumber : pema8250.70d
ProductDescription : pema8250.70d 8-Channel Pema 8250 Protea-Equipped Media Amplifier with Dante Digital Interface, 250 Watts Continuous Average Power at 70V, 8 Built-in Mic Preamps, Stereo Sum to Mono

KEY FEATURES
- FIR Filter capable
- 8-in x 8-out sophisticated matrix mixing
- 8 built-in mic preamps
- Automatic feedback suppression
- Ambient noise compensation
- Dedicated telephone/PBX input
- Dual RCA and balanced Euroblock inputs
- Dedicated telephone/PBX input
- Post DSP AUX line level outputs
- Stereo sum to mono
- Adjustable HP/LP filters
- 96kHz or 48kHz sample rate
- 32-Bit SHARC DSP
- 24-Bit A/D–D/A audio resolution
- 15V phantom power for mic inputs
- Full control using Ashly software over 10/100 baseT Ethernet
- Event scheduling and real-time clock
- Gain sharing automatic microphone mixer
- Automatic feedback suppression
- Ambient noise compensation
- Built-in pink/white noise and sine wave generator
- Euroblock connectors for preset recall, DC remote level control and serial data control
- Intuitive wall remotes
- Level control via variable DC control voltage
- Stand-By mode activation via contact closure
- Multi-level Security
- Safety/Compliance: TUV, CE, FCC, RoHS

SPECIFICATIONS
- Input Sensitivity: 7.2dBu
- Voltage Gain: 32dB
- Damping Factor: >250 (8 Ohm load, <1kHz)
- Channel Separation: -80dB (dB from full output, 1kHz)
- Frequency Response: 20Hz–20kHz, +/-1dB
- Mic/Line Input Impedance: 4.8k Ohms
- Mic/Line Maximum Input Level: +21dBu
- Mic/Line Preamp Gain: 0, +20dB, +40dB, +60dB
- Mic/Line Phantom Power: +15V, switchable ch. 1-4, 5-8
- Environmental 40-120 deg. F (noncondensing)
- AC Mains: 120VAC or 240VAC, ±10% 50–60Hz
- Power Cable Connector: 15A Edison, 3-Prong IEC
- Dimensions: 19"W x 3.50"H x 16.84"D
- Weight: 25 lbs


ProductSiteLaunchDate : 2024-10-26T15:32:59.212Z
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 52161547