Specification Brand : Generic BulletPoint1 : 8-in x 8-out sophisticated matrix mixing, 8 built-in mic preamps BulletPoint2 : Automatic feedback suppression, Ambient noise compensation BulletPoint3 : 96kHz or 48kHz sample rate, 32-Bit SHARC DSP, 24-Bit A/D–D/A audio resolution BulletPoint4 : Euroblock connectors for preset recall, DC remote level control and serial data control BulletPoint5 : Stand-By mode activation via contact closure, Multi-level Security IncludedComponents : No ItemName : pema4250.25c 4-Channel Pema 4250 Protea-Equipped Media Amplifier with CobraNet Digital Interface, 250 Watts Continuous Average Power at 25V, FIR Filter Capable, 8 Built-in Mic Preamps ItemTypeKeyword : electronic-component-audio-amplifiers Manufacturer : Ashly ModelNumber : pema4250 NumberOfItems : 1 PartNumber : pema4250.25c ProductDescription : pema4250.25c 4-Channel Pema 4250 Protea-Equipped Media Amplifier with CobraNet Digital Interface, 250 Watts Continuous Average Power at 25V, FIR Filter Capable, 8 Built-in Mic Preamps
KEY FEATURES - FIR Filter capable - 8-in x 8-out sophisticated matrix mixing - 8 built-in mic preamps - Automatic feedback suppression - Ambient noise compensation - Dedicated telephone/PBX input - Dual RCA and balanced Euroblock inputs - Dedicated telephone/PBX input - Post DSP AUX line level outputs - Stereo sum to mono - Adjustable HP/LP filters - 96kHz or 48kHz sample rate - 32-Bit SHARC DSP - 24-Bit A/D–D/A audio resolution - 15V phantom power for mic inputs - Full control using Ashly software over 10/100 baseT Ethernet - Event scheduling and real-time clock - Gain sharing automatic microphone mixer - Automatic feedback suppression - Ambient noise compensation - Built-in pink/white noise and sine wave generator - Euroblock connectors for preset recall, DC remote level control and serial data control - Intuitive wall remotes - Level control via variable DC control voltage - Stand-By mode activation via contact closure - Multi-level Security - Safety/Compliance: TUV, CE, FCC, RoHS
SPECIFICATIONS - Input Sensitivity: 6.2dBu - Voltage Gain: 26dB - Damping Factor: >250 (8 Ohm load, <1kHz) - Channel Separation: -80dB (dB from full output, 1kHz) - Frequency Response: 20Hz–20kHz, +/-1dB - Mic/Line Input Impedance: 4.8k Ohms - Mic/Line Maximum Input Level: +21dBu - Mic/Line Preamp Gain: 0, +20dB, +40dB, +60dB - Mic/Line Phantom Power: +15V, switchable ch. 1-4, 5-8 - Environmental 40-120 deg. F (noncondensing) - AC Mains: 120VAC or 240VAC, ±10% 50–60Hz - Power Cable Connector: 15A Edison, 3-Prong IEC - Dimensions: 19"W x 3.50"H x 16.84"D - Weight: 23.5 lbs