nXe8004bc 4-Channel Networkable Multi-Mode Power Amplifier with CobraNet & OPDAC4 Option Cards; Maximum Rated Output Power Shall Be 800W Per Channel at Low Z, 70V, and 100V Mode

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 1035500/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : Generic
BulletPoint1 : Ethernet Control and monitoring of amplifier functions, with front panel COM activity LED
BulletPoint2 : Use Protea Software to remotely disable all front panel controls, including the on/off switch, for a tamper-proof installation
BulletPoint3 : Instant Standby Mode 30% reduction in power consumption with on/off and Preset Recall, both via contact closure, software control, or event scheduler
BulletPoint4 : Energy Management System (EMS) for increased efficiency) automatic <1Wsleep-mode (defeatable)
BulletPoint5 : Multiple internal power supplies provide increased channel separation and reliability
IncludedComponents : No
ItemName : nXe8004bc 4-Channel Networkable Multi-Mode Power Amplifier with CobraNet & OPDAC4 Option Cards; Maximum Rated Output Power Shall Be 800W Per Channel at Low Z, 70V, and 100V Mode
ItemTypeKeyword : electronic-component-audio-amplifiers
Manufacturer : Ashly
ModelNumber : nXe8004bc
NumberOfItems : 1
PartNumber : nXe8004bc
ProductDescription : nXe8004bc 4-Channel Networkable Multi-Mode Power Amplifier with CobraNet & OPDAC4 Option Cards; Maximum Rated Output Power Shall Be 800W Per Channel at Low Z, 70V, and 100V Mode

KEY FEATURES
- Maximum Rated Output Power Shall Be 800W Per Channel at Low Z, 70V, and 100V Mode
- Ethernet Control and monitoring of amplifier functions, with front panel COM activity LED
- Serial data port for use with Ashly remote control devices
- Real-Time Clock with Event Scheduler
- Programmable power-on delay
- Aux preamp outputs, and fault condition logic outputs
- Rear panel DIP switches select low impedance (2, 4, and 8 Ohm), constant voltage (70V or 100V), high pass filter, limiter and input gain on each channel
- Energy Management System (EMS) for increased efficiency) automatic <1Wsleep-mode (defeatable)
- Switch mode power supply automatically detects 120V or 240V AC operation
- Extensive protection circuitry
- Continuously variable cooling fans
- Euroblock input connectors & Euroblock loudspeaker connectors
- Front panel power switch and level controls
- Multiple internal power supplies provide increased channel separation and reliability
- Safety / Compliance: cTUVus, CE, FCC, RoHS

SPECIFICATIONS
- Voltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V
- Damping Factor: >250 (8 Ohm load <1kHz)
- Input High Pass Filter: 80Hz 2nd order
- Distortion (SMPTE): <0.5%
- Distortion (THD-N): <0.5% (8 Ohms, 10dB below rated power, 20Hz–20kHz)
- Channel Separation: -75dB (dB from full output, 1kHz)
- Signal-to-Noise (unweighted) 20Hz-20kHz, Gain@26dB: >108dB
- Frequency Response: 20Hz-20kHz, +/-0.05dB
- Input Impedance: 10k Ohms
- Maximum Input Level: +21dBu
- AUX Output Maximum Level: +21dBu
- Nominal Voltage Input: 100 – 240VAC
- Operating Range: 70 – 270VAC
- Dimensions: 19"L x 3.5"H x 16.84"D
- Weight: 25.9lbs


ProductSiteLaunchDate : 2024-10-24T01:56:15.477Z
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 52161547

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.