Specification Brand : Generic BulletPoint1 : 10/100 Ethernet comes standard BulletPoint2 : 250-Watt Constant Voltage 70V BulletPoint3 : Ethernet remote control and monitoring BulletPoint4 : Stepped, calibrated input attenuators BulletPoint5 : Selectable HPF frequencies (80Hz, 400Hz, off) IncludedComponents : No ItemName : ne8250.70bc 8-Channels Network-Enabled Class-D Power Amplifier with CobraNet and OPDAC4 Option Cards, Switching Power Supply, 250-Watt Constant Voltage 70V, Remote Turn On/Off ItemPackageDimensions_Height : 2 centimeters ItemPackageDimensions_Length : 8 centimeters ItemPackageDimensions_Width : 6 centimeters ItemTypeKeyword : electronic-component-audio-amplifiers Manufacturer : Ashly ModelNumber : ne8250.70bc NumberOfItems : 1 PartNumber : ne8250.70bc ProductDescription : ne8250.70bc 8-Channels Network-Enabled Class-D Power Amplifier with CobraNet and OPDAC4 Option Cards, Switching Power Supply, 250-Watt Constant Voltage 70V, Remote Turn On/Off
Connecting and controlling an amplifier for networked systems has now been simplified with Network-Enabled Amplifiers. This line offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea ne Software. No special outboard control units are needed. Choose either 4-channel ne4250 or 8-channel ne8250 amplifiers are rated at 250W per channel with separate HI-Z and LO-Z models.
KEY FEATURES - 10/100 Ethernet comes standard - 250-Watt Constant Voltage 70V - DC voltage remote gain control - Ethernet remote control and monitoring - Switch mode supply, Class-D output - Stepped, calibrated input attenuators - Remote turn on/off - Disable all front panel controls via software - Temperature-sensitive variable speed fan with side-to-front airflow - Selectable HPF frequencies (80Hz, 400Hz, off) - 4-stage level meters - Output current and temp indicators - Safety/Compliance: TUV, CE, FCC,RoHS
SPECIFICATIONS - Frequency Response: 20Hz–20kHz, (unweighted) ±1dB - Input Impedance: 20k Ohms, Balanced - Voltage Gain: 26dB - Input Sensitivity: 6.2dBu - Maximum Input Level: +21dBu - Signal to Noise (20-20k, Unweighted): >107db - Distortion (8 Ohm load): (SMPTE) <0.5%, (THD-N) <0.5% (20Hz-20kHz) - Damping Factor (8 Ohms, 1kHz): >250 - Output Circuitry: Class D - AC Main: 120VAC or 240VAC ±10% (factory set), 50–60Hz - Power Cable Connector: 15A Edison, 3-Prong IEC - Airflow: IN through sides, OUT through front - Environmental: 40-120°F noncondensing - Dimensions: 19"W x 3.50"H x 16.84"D - Weight: 24.7 lbs