Cart 2 india

Specification
Brand : FLYINSKY
BulletPoint1 : Abundant headphone jacks, convenient to connect to different headphone single-ended 6.35, balanced 4.4, balanced 3.5pro, balanced XLR.
BulletPoint2 : The matrix relay volume is adopted to ensure the same volume of left and right, and there is no need to worry about the noise bias after a long time.
BulletPoint3 : Using FPGA programming human-computer interaction system, remote control volume, can be used at the current level.
BulletPoint4 : Preamplifier, lnput buffer - OPA 1642 and OPA 1678 are used to match the impedance of the front end to facilitate different front-end compatibility. There are three-stage gain adjustments to adapt to headphones with different impedances. The pre-amplification and drive circuit adopts the combination of LME49722+LME49724.
BulletPoint5 : Post stage hybrid circuit - Single ended and balanced are designed separately, completely independent circuit. Both single ended and balaneed have high power output, enough to drive most common headphones.
Color : Silver
ExternallyAssignedProductIdentifier1 : 0639395639559
ExternallyAssignedProductIdentifier2 : 639395639559
IncludedComponents : Finished Machine*1, Remote Controller*1
ItemName : GUSTARD H16 HiFi Pre-Amplifier High Resolution OLED Display XLR/RCA Balanced Headphone Amplifier, Silver
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 7 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemTypeKeyword : electronic-component-audio-amplifiers
Manufacturer : FLYINSKY
Material : Copper
ModelNumber : LiebeWHnk59vrmsb7
NumberOfItems : 1
PartNumber : GUSTARDH16S
ProductDescription : *Analog input:
- One set of RCA standard input, typical input sensitivity: 2Vrms; input impedance 4.7kΩ
- One set of XLR balanced input, typical input sensitivity: +18dBu maximum + 26dBu; input impedance 10kΩ

*Preamplifier analog output(XLR on the rear panel):
- Frequency response: 20-80kHz/-0.1dB
- Signal to noise ratio: 120dB
- Channel crosstalk: -120dB@1kHz
- THD+N: <0.0004%
- IMD: <0.0004%

*Headphone output (front panel output):
- Single port output impedance(6.35mm): 0.1Ω
- Balance port output impedance(XLR 4 PIN, TRS4.4,3.5PRO): 0.2Ω
- Frequency response: 20-80kHz/-0.1dB
- Signal to noise ratio: >118dB
- Channel crosstalk: -118dB@1kHz
- THD+N(1KHz): <0.0005%@3700mW into 640 LOAD
- IMD: <0.0005% @3700mW into 640 LOAD
- Maximum undistorted output power 3700mW into 64Ω LOAD balanced output

*Load power (balanced output, high gain):
64Ω 3700mW
150Ω 2268mW
300Ω 1133mW
600Ω 566mW
*Other specifications:
- AC Power supply: AC 115V/230V 50/60Hz
- Power consumption: <20W
- Dimensions: 220mm*50mm*170mm
- Weight: 2.5Kg
ProductSiteLaunchDate : 2024-05-23T04:20:08.680Z
Style : Silver
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1