Cart 2 india

Specification
Brand : Parts Express
BulletPoint1 : Power Rated @ 8 Ω ONLY. Output Power : 20-20kHz, 1W with 1 khz Power Output RMS : 500 W RMS, 1000 W peak (overall) @ 8 Ω. 400 W RMS, 800 W peak (LF) 100 W RMS, 200 W peak (HF)
BulletPoint10 : Energy-Efficient Class-D Amplification: Reduces heat and power consumption.
BulletPoint2 : Frequency Response(+o/-0.3dB,1W/8Ω) : 20 Hz - 34 kHz Crossover Frequency : 1.7 Khz THD : 20 Hz - 20 kHz for 1 W <0.1% Signal-to-Noise Ratio : >112 dBA Channel separation : (Crosstalk) at 1 kHz >70 dB
BulletPoint3 : Input Connectors (per channel) : 3-pin XLR, 1/4" phono, electronically balanced. Output Connector (Mix Out) : 3-pin XLR, electronically balanced Class : D wiring Operating voltage : 110 V / 220 V nominal
BulletPoint4 : Dimensions : (L×W×D) : 12.5" x 5.5" x 2" (317.5mm x 139.7mm x 50.8mm). Packing dimension : 14.5" x 10" x 5" (368.3mm x 254mm x 127mm) Net weight :2.73lbs (1.23Kgm) Gross weight :3lbs(1.36Kgm)
BulletPoint5 : Included IR Receiver with Filtering: Resists interference from LCD/Plasma and supports AT&T Uverse.
BulletPoint6 : Subwoofer Line-Level Output: Connects directly to powered subwoofers for added bass.
BulletPoint7 : Audio Sensing Power-On: Turns on automatically when audio signal is detected.
BulletPoint8 : Customizable EQ Controls: Adjust bass, treble, and balance via the included remote.
BulletPoint9 : VersaBox Compatible: Fits neatly in Episode’s Strong VersaBox for clean installs.
Color : #111
ExternallyAssignedProductIdentifier1 : 848864065663
ExternallyAssignedProductIdentifier2 : 0848864065663
IncludedComponents : Amplifer Module
ItemName : 2 x 100W Bluetooth 5.0 TDA7498 Amplifier Board with Micro SD Card Reader 12 to 30 VDC
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemTypeKeyword : electronic-component-audio-amplifiers
Manufacturer : Parts Express
Material : Copper
MaximumSupplyVoltage : 24 volts
MinimumSupplyVoltage : 12 volts
ModelName : Fafeicyu3ohk7vgd5
ModelNumber : 110V
MountingType : Surface Mount
NumberOfChannels : 2
NumberOfItems : 1
OperatingTemperature : -20 degrees_celsius
OutputPower : 35 watts
PartNumber : EKX12P/15P
ProductDescription : LASE Amplifer for Mackie THUMP 1300w 12A or 15A for Mackie THUMP Powered Speaker Cabinet. Professional Bi-Amp Power-Amplifier Module With DSP Control. This will not work on the Original Mackie Thump 15A & 12A or Thump 12BST or 15BST Speakers (2) Two Individual Channel Inputs with Push Button mic/line level inputs. A Mix level XLR output ( Pre DSP). Master Control with DSP (digital signal processor) push button control.
ProductSiteLaunchDate : 2025-01-09T13:34:50.416Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SupplyCurrent : 5 amps
UnspscCode : 52161547
Voltage : 12 volts