Cart 2 india
In2Cart
Rs. 0
0
Home / Automotive / Anti-Seize
Product Information
Editorial Review
Kopr-Kote Industrial is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. It provides a shield against metal-to-metal contact, preventing seizure and corrosion. It fills irregularities and imperfections and resists welding, hardening, or setting. Kopr-Kote Industrial provides low friction and cushions impact and shock loads. Low shear between particles reduces stick-slip, allowing quick disassembly with minimum wrench torque. It will not squeeze out of the threads, gum up, or wash off. Has controlled frictional characteristics so that the surfaces of the nut and bolt are torque to the designed K-factor. Assures full hydraulic efficiency by allowing the metal surfaces to slide over each other without metal-to-metal contact. Designed for specially formulated to prevent excessive over torque issues and has a very high static friction factor of 0.17, the unique blend of complex thickeners to help evenly distribute the copper flake onto the metal surfaces to eliminate metal to threaded metal contact. Recommended lubrication: stud threads shall be thoroughly lubricated on both ends, fill the threaded area "Root-to-Crest" on the stud/bolt. The nut will push the anti-seize down the threads as it travels. Bearing surfaces between nut and hardened waher or nut and flange should be lubricated with anti-seize in the area where the nut will rest against the flange or washer. Anti-seize on the assembly should be easily visible. Not recommended for: Oxygen services or on zinc coated parts or fasteners. Wear gloves and protective overalls. Do not allow it to enter drains. Spillage: scrape up bulk, then wipe up remainder with cloth. To prevent walking hazard, pick up remaining residue with diatomaceous earth. Service rating: -65 degree F to 1800 degree F. K-Factor: 0.15. Eco-certified. Size: 1 lbs brush top can.
Features
1) Retains the equipment in serviceable condition
2) Environmentally safe formula is free of sulfur, lead, copper and other environmentally undesirable metals
3) Assures protection against rust, oxidation and corrosion
4) Will not harden, evaporate, or settle out; and requires no thinning
5) Water resistant and excellent for rough-cut threads made of cast iron, steel and most alloys
Specification
Binding : Misc.
Brand : Jet-Lube
EAN : 0096542100049
Label : Jet-Lube
Manufacturer : Jet-Lube
Model : 10004
PackageDimensions_Weight : 115.00 hundredths pounds
PackageDimensions : L:4.40 X W:3.40 X H:3.30
ProductGroup : BISS
ProductTypeName : ADHESIVES_AND_SEALANTS
Publisher : Jet-Lube
Size : 1 pound
Studio : Jet-Lube
Title : Jet-Lube Kopr-Kote Industrial Anti-Seize and Thread Lubricant, 1 lbs Brush Top Can
Kopr-Kote Industrial is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. It provides a shield against metal-to-metal contact, preventing seizure and corrosion. It fills irregularities and imperfections and resists welding, hardening, or setting. Kopr-Kote Industrial provides low friction and cushions impact and shock loads. Low shear between particles reduces stick-slip, allowing quick disassembly with minimum wrench torque. It will not squeeze out of the threads, gum up, or wash off. Has controlled frictional characteristics so that the surfaces of the nut and bolt are torque to the designed K-factor. Assures full hydraulic efficiency by allowing the metal surfaces to slide over each other without metal-to-metal contact. Designed for specially formulated to prevent excessive over torque issues and has a very high static friction factor of 0.17, the unique blend of complex thickeners to help evenly distribute the copper flake onto the metal surfaces to eliminate metal to threaded metal contact. Recommended lubrication: stud threads shall be thoroughly lubricated on both ends, fill the threaded area "Root-to-Crest" on the stud/bolt. The nut will push the anti-seize down the threads as it travels. Bearing surfaces between nut and hardened waher or nut and flange should be lubricated with anti-seize in the area where the nut will rest against the flange or washer. Anti-seize on the assembly should be easily visible. Not recommended for: Oxygen services or on zinc coated parts or fasteners. Wear gloves and protective overalls. Do not allow it to enter drains. Spillage: scrape up bulk, then wipe up remainder with cloth. To prevent walking hazard, pick up remaining residue with diatomaceous earth. Service rating: -65 degree F to 1800 degree F. K-Factor: 0.15. Eco-certified. Size: 1 lbs brush top can.
Features
1) Retains the equipment in serviceable condition
2) Environmentally safe formula is free of sulfur, lead, copper and other environmentally undesirable metals
3) Assures protection against rust, oxidation and corrosion
4) Will not harden, evaporate, or settle out; and requires no thinning
5) Water resistant and excellent for rough-cut threads made of cast iron, steel and most alloys
Specification
Binding : Misc.
Brand : Jet-Lube
EAN : 0096542100049
Label : Jet-Lube
Manufacturer : Jet-Lube
Model : 10004
PackageDimensions_Weight : 115.00 hundredths pounds
PackageDimensions : L:4.40 X W:3.40 X H:3.30
ProductGroup : BISS
ProductTypeName : ADHESIVES_AND_SEALANTS
Publisher : Jet-Lube
Size : 1 pound
Studio : Jet-Lube
Title : Jet-Lube Kopr-Kote Industrial Anti-Seize and Thread Lubricant, 1 lbs Brush Top Can
