Cart 2 india

Specification
Brand : Walter Surface Technologies
BulletPoint : Pilot pin helps locate center of hole location^As the pilot pin retracts into the cutter during the cut it introduces lubrication to the cutting teeth and reduces heat gain in slug^Pilot pin helps eject the slug after the cutting operation is complete^Jancy pilot pins are made of hardened M-2 tool steel providing long life and can be used over the life of several cutters
BulletPoint1 : Drilling Shank: drill bit is coated with a mixture of aluminium and chromium to outperform any other tool. Fully ground extra-large flutes, modern design, and cutter geometry ensure a smooth finish
BulletPoint2 : Annular Cutter: this universal shank is designed to be used on steel, stainless steel, structural steel, and aluminum surfaces. The drilling tool also offers application on surfaces where lubricants cannot be applied
BulletPoint3 : Applications: drilling tool can withstand up to 200 deg. C higher temperatures and provides smooth drilling on sheet metal and thin-walled materials. It can be combined with stationary machines and magnetic drilling units
BulletPoint4 : Performance: enhance the life of this universal drill bit by using Walter lubricant and reduce drilling time. The new technology coating offers resistance against higher stress along with an instant impact
BulletPoint5 : Specifications: annular core cutter has a 1 5/16 in. cutting diameter and 1 in. cutting length
Color : 1" Cut Depth
ExternallyAssignedProductIdentifier1 : 662980782156
ExternallyAssignedProductIdentifier2 : 0662980782156
ExternallyAssignedProductIdentifier3 : 00662980782156
FinishType : ICECUT (AlCrN)
IncludedComponents : One cutter and pin
ItemDisplayDimensions_Height : 1 inches
ItemDisplayDimensions_Length : 9 inches
ItemDisplayDimensions_Width : 7 inches
ItemName : Walter 05F105 ICECUT Annular Core Cutter - 1 5/16 in. x 1 in. M2Al Universal Shank with Chromium, Aluminum Coating. Drilling Tools and Accessories
ItemPackageDimensions_Height : 1.6 inches
ItemPackageDimensions_Length : 7.8 inches
ItemPackageDimensions_Width : 3.5 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : annular-cutters
Manufacturer : J. Walter Company Ltd.
Material : M2Al
MeasurementSystem : Imperial
ModelNumber : 05F105
NumberOfFlutes : 2
NumberOfItems : 1
PackageLevel : unit
PartNumber : WAL-05F105
ProductDescription : NEW BLUEROCK Brand 1-3/8" Depth Tungesten Carbide Tip Annular Cutters. This is a new set of 6 TCT annular cutters for a 3/4" Weldon Shank. The sets comes with 2 centering pins in a plastic case. Sizes: 9/16"x1-3/8" 11/16"x1-3/8" 13/16"x1-3/8" 15/16"x1-3/8" 1"x1-3/8" 1-1/16"x1-3/8" These are the industry standard sizes for this type of set. It comes in the quality padded plastic carrying case.
ProductSiteLaunchDate : 2018-07-30T08:00:01.000Z
Size : 1-5/16" x 1"
StreetDate : 2018-07-30T00:00:01Z
Style : 2" Depth of Cut
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Aluminum
SurfaceRecommendation1 : Metal
SurfaceRecommendation10 : Masonry
SurfaceRecommendation11 : Brick
SurfaceRecommendation12 : Tile
SurfaceRecommendation2 : Stainless Steel
SurfaceRecommendation3 : Cast Iron
SurfaceRecommendation4 : Iron
SurfaceRecommendation5 : Brass
SurfaceRecommendation6 : Copper
SurfaceRecommendation7 : Alloy Steel
SurfaceRecommendation8 : Concrete
SurfaceRecommendation9 : Stone
UnitCount : 1
UnspscCode : 27112800