Cart 2 india

Specification
Brand : Steel Dragon Tools
BulletPoint1 : Steel Dragon Tools 1-3/4-inch carbide-tipped annular cutter.
BulletPoint2 : Bit Size: 1-3/4 in.
BulletPoint3 : Cutting Depth: 2 in.
BulletPoint4 : 3/4 in. Weldon Shank
BulletPoint5 : Machine-finish hole with no reaming needed when using lubricant.
ExternallyAssignedProductIdentifier : 7299699012613
ExternallyAssignedProductIdentifier1 : 819891026675
ExternallyAssignedProductIdentifier2 : 0819891026675
FinishType : Finish
IncludedComponents : inc
ItemDisplayDimensions_Height : 1 inches
ItemDisplayDimensions_Length : 9 inches
ItemDisplayDimensions_Width : 7 inches
ItemName : Steel Dragon Tools DNTX-D1750 1-3/4" x 2" Carbide Tip Annular Cutter 3/4" Weldon
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 9 inches
ItemPackageDimensions_Width : 7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : annular-cutters
Manufacturer : Steel Dragon Tools
Material : Carbide
MeasurementSystem : Imperial
ModelNumber : Garosa09vir1d2cg-03
NumberOfItems : 1
PartNumber : DNTX-D1750
ProductDescription : Steel Dragon Tools DNTX-D1750 1-3/4" x 2" Carbide Tip Annular Cutter 3/4" Weldon

The Steel Dragon Tools 1-3/4-inch carbide-tipped annular cutter. This bit will quickly and safely cut holes in steel. This bit has a 2-inch cutting depth with a 3/4 in. Weldon shank.

Features:

SDT annular cutters will drill large holes up to ten times faster than regular drills bits.

Bit Size: 1-3/4 in.

Cutting Depth: 2 in.

3/4 in. Weldon Shank

Machine-finish hole with no reaming needed when using lubricant.

Make overlapping holes, slotting holes, and edge cuts.

Bit size is etched on each cutter.


ProductSiteLaunchDate : 2018-11-15T14:51:18.157Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
SurfaceRecommendation1 : Plastic
SurfaceRecommendation2 : Metal
SurfaceRecommendation3 : Copper
UnitCount : 1
UnspscCode : 27112800