Cart 2 india

Specification
Brand : MaxTool
BulletPoint1 : 3/4-Inch Weldon shank with 2 flats at 90-Degree makes cutters mounting reliable, and extend tool life than other mounting system. It fits most brand magnetic drill presses;
BulletPoint2 : Multiple cut edges provide more efficient cut rate with less chatter and suit to making overlapping holes, slotting holes and edge cuts in various metals accurately, quickly & safely;
BulletPoint3 : I.D. back taper improves easily discharge metal slugs, faster feeding, and less friction; O.D. margin ensures only a small lend touches the outside of the hole which provide less fraction and a better hole surface finish;
BulletPoint4 : Precision fully ground flutes provide easier chip removal, less H.P. needs, better cutting performance and a smooth hole finish in various materials, especially in deeper holes; Using coolant or Lubricant for better cutting result;
BulletPoint5 : Hougen cutters maximize feed rates because up to 10 or more cutting edges distribute the cutting load evenly. By converting a smaller area to chips, hougen cutters require less horsepower and thrust. American made.
CuttingAngleString : 90.0 degrees
ExternallyAssignedProductIdentifier1 : 634301927867
ExternallyAssignedProductIdentifier2 : 0634301927867
ExternallyAssignedProductIdentifier3 : 849713028389
FinishType : Uncoated
GpsrSafetyAttestation : 1
ItemName : MaxTool 1-5/8"x2 Annular Cutters 41mmx51mm Magnetic Core Drills Slug Cutter HSS M2 High Speed Steel 2" Deep Weldon Shank; ANW02W2R140
ItemPackageDimensions_Height : 9 centimeters
ItemPackageDimensions_Length : 5 centimeters
ItemPackageDimensions_Width : 5.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : annular-cutters
Manufacturer : Sichuan Tools
Material : High Speed Steel
ModelNumber : ANW02W2R140
NumberOfFlutes : 6
NumberOfItems : 1
PartNumber : ANW02W2R140
ProductDescription : Annular Cutters or magnetic core drills are for precision hole making in a wide range material MaxTool Magnetic Core drills/Annular Cutters make clean, burr-free, round holes with no deform of stock or damage to the surrounding material;

Ideal for metal sheets and rust proofing access holes because the snap-in plugs fit perfectly;

Cutting Depth from 1" to 4" available;

Premium High Speed Steel M2 ensures a longer tool life. The unique geometry provides aggressive cutting than traditional hole saws and twist drills. Large holes can be drilled up to ten times faster than regular drills;

Weldon shank with 2 flats at 90-Degree makes cutters mounting reliable, and extend tool life than other mounting system. It fits most brand magnetic drill pressers;

Multiple cut edges provide more efficient cut rate with less chatter and suit to making overlapping holes, slotting holes and edge cuts in various metals accurately, quickly & safely;

I.D. back taper improves easily discharge slugs, faster feeding, and less friction; O.D. margin ensures only a small land touches the outside of the hole which provide less fraction and a better hole surface finish;

Precision fully ground flutes provide easier chip removal, less H.P., better cutting performance and a smooth hole finish in various materials, especially in deeper holes; Using coolant or Lubricant for better cutting result;

MaxTool all items are carefully inspected before listing to ensure that we only offer consistent quality products.

MaxTool is a cutting tools distributor in New York to meet a wide range cutting demand of customers in today markets;

MaxTool warmly welcomes everyone to visit our Amazon Store, and honestly appreciates everyone very much to give a cooperative chance to discuss your requirement. You can always rely on MaxTool.

MaxTool slogan is Consistent Quality.

MaxTool! ToolMax!
ProductSiteLaunchDate : 2018-01-30T04:10:07.973Z
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
UnitCount : 1
UnspscCode : 20121600