Cart 2 india

Specification
Brand : MaxTool
BulletPoint : MULTI METAL 1-3/4" X 2-1/4"
BulletPoint1 : Premium Carbide Tips ensure a longer tool life. The unique geometry provides aggressive cutting than traditional hole saws and twist drill bits. Large holes can be drilled up to ten times faster than regular drills;
BulletPoint2 : 3/4-Inch Weldon shank with 2 flats at 90-Degree makes cutters mounting reliable, and extend tool life than other mounting system. It fits most brand magnetic drill presses;
BulletPoint3 : Multiple cut edges provide more efficient cut rate with less chatter and suit to making overlapping holes, slotting holes and edge cuts in various metals accurately, quickly & safely;
BulletPoint4 : I.D. back taper improves easily discharge metal slugs, faster feeding, and less friction; O.D. margin ensures only a small lend touches the outside of the hole which provide less fraction and a better hole surface finish;
BulletPoint5 : Precision fully ground flutes provide easier chip removal, less H.P. needs, better cutting performance and a smooth hole finish in various materials, especially in deeper holes; Using coolant or Lubricant for better cutting result;
Color : Hrc 50 Degrees
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Metal
CompatibleMaterial3 : Aluminum
CuttingAngleString : 90.0 degrees
ExternallyAssignedProductIdentifier : 8199569916951
ExternallyAssignedProductIdentifier1 : 634301953767
ExternallyAssignedProductIdentifier2 : 0634301953767
FinishType : Uncoated
GpsrSafetyAttestation : 1
HandOrientation : Right Hand
IncludedComponents : Center pin
ItemName : MAXTOOL 1-3/16"x1-3/8 TCT Annular Cutters & Pin Carbide Tip Slugger 30x35mm Magnetic Core Drills Slug Cutter 1-3/8" Deep Weldon Shank; ANW00S35R112
ItemPackageDimensions_Height : 11.7 centimeters
ItemPackageDimensions_Length : 3.8 centimeters
ItemPackageDimensions_Width : 4 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : annular-cutters
Manufacturer : M&G
Material : Carbide
Material1 : Blend
Material2 : Blend
Material3 : Blend
Material4 : Blend
Material5 : Blend
ModelName : DMC-25
ModelNumber : ANW00S35R112
NumberOfBoxes : 1
NumberOfFlutes : 6
NumberOfItems : 2
PackageLevel : unit
PartNumber : ANW00S35R112
Pattern : Solid
PowerSourceType : ac
ProductDescription : Annular Cutters, Magnetic Railway Core Drills or Broach Cutters are for precision hole making in a wide range material;MaxTool Magnetic Core drills/Annular Cutters make clean, burr-free, round holes with no deform of stock or damage to the surrounding material;

Ideal for metal sheets and rust proofing access holes because the snap-in plugs fit perfectly;

Premium carbide tips provide sharp, hard and a long tool life. The unique geometry provides aggressive cutting than traditional tools. Large holes can be drilled up to ten times faster than regular drills;

Weldon shank with 2 flats at 90-Degree makes cutters mounting reliable, and extend tool life than other mounting system. It fits most brand magnetic drill presses;

Multiple cut edges provide more efficient cut rate with less chatter and suit to making overlapping holes, slotting holes and edge cuts in various metals accurately, quickly & safely;

I.D. back taper improves easily discharge slugs, faster feeding, and less friction; O.D. margin ensures only a small land touches the outside of the hole which provide less fraction and a better hole surface finish;

Precision fully ground flutes provide easier chip removal, less H.P., better cutting performance and a smooth hole finish, especially in deeper holes; Using coolant or Lubricant for better cutting result;

MaxTool is a cutting tools distributor in New York to meet a wide range cutting demand in today's markets;

MaxTool supplies standard and custom-made high performance cutting tools for machining ferrous, non-ferrous, etc;

All items are carefully inspected before listing;

MaxTool warmly welcomes and honestly appreciates everyone to give a chance to discuss your demand;

MaxTool will do the best to make every one satisfaction. You can always rely on MaxTool;

MaxTool’s slogan is Consistent Quality;

MaxTool! ToolMax!
ProductSiteLaunchDate : 2021-04-07T03:39:23.110Z
Size : 12x75x90R
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SurfaceRecommendation : Alloy Steel
UnitCount : 1
UnspscCode : 27110000