Cart 2 india

Specification
Brand : Jancy
BulletPoint : Pilot pin helps locate center of hole location^As the pilot pin retracts into the cutter during the cut it introduces lubrication to the cutting teeth and reduces heat gain in slug^Pilot pin helps eject the slug after the cutting operation is complete^Jancy pilot pins are made of hardened M-2 tool steel providing long life and can be used over the life of several cutters
BulletPoint1 : Manufacturer: Milwaukee
BulletPoint2 : Country of manufacture: Germany
BulletPoint3 : Power Cutting & Sawing
BulletPoint4 : 20% Thinner Wall Construction - Faster Cutting due to less material being removed for the same size hole. Duel Alternating Tooth Geometry - More aggressive cutting as well as increased chip ejection. Cuts up to 15% faster.
BulletPoint5 : Proprietary Steel and 3 Hardness Zones - Makes the bit less susceptible to breakage. 3/4" Weldon Shank - Fits most small magnetic drill presses. One Centering pin size for all 2" depth cutters. Ejector pin sold separately.
BulletPoint6 : Diameter 3/4"
BulletPoint7 : Cutting Depth 2 in
BulletPoint8 : Diameter Shank 3/4 in
Color : 3" Cut Depth
ExternallyAssignedProductIdentifier : 8718375412336
ExternallyAssignedProductIdentifier1 : 4014586721316
ExternallyAssignedProductIdentifier2 : 04014586721316
ExternallyAssignedProductIdentifier3 : 00045242207794
GpsrSafetyAttestation : 1
IncludedComponents : Unit^Instruction Guide
ItemDisplayDimensions_Height : 4 inches
ItemDisplayDimensions_Length : 2 inches
ItemDisplayDimensions_Width : 2 inches
ItemName : Jancy Slugger 16010 Pilot Pin For 4" Depth High-Speed Steel and Cobalt Steel Annular Cutters
ItemPackageDimensions_Height : 1.016 centimeters
ItemPackageDimensions_Length : 16.256 centimeters
ItemPackageDimensions_Width : 4.318 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : annular-cutters
Manufacturer : Jancy Engineering
Material : High Speed Steel
ModelNumber : 16010
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : 16010
ProductDescription : OSCARBIDE Annular Cutter 1-13/16 inch Cutting Diameter,1 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece
ProductSiteLaunchDate : 2010-04-01T00:00:01-07:00
Size : 5/8"
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
UnitCount : 1
UnspscCode : 20121600