Cart 2 india

Specification
Brand : Hougen
BulletPoint : Circuit Board Drill Bits
BulletPoint1 : Hougen has been making “12, 000-series” annular cutters since we invented them in 1974. At one time, our president was putting the tooth geometry on every hougen cutter in the world.
BulletPoint2 : 3/4" two flats for cutter mounting, o. D. Margins, i. D. Margins, fully fluted tools, patented tooth geometries, material types, coatings, and resharpenability.
BulletPoint3 : Hougen cutters with the hougen-edge, feature a patented tooth geometry that provides long tool life, less chatter, and extended resharpenability.
BulletPoint4 : Compared to traditional tooling (twist drills, etc. ) hougen cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs.
BulletPoint5 : Hougen cutters maximize feed rates because up to 10 or more cutting edges distribute the cutting load evenly. By converting a smaller area to chips, hougen cutters require less horsepower and thrust. American made.
Color : One Color
CuttingAngleString : 118 degrees
CutType : Center Cutting
EndCutType : Annular
ExternallyAssignedProductIdentifier : 9408675766725
ExternallyAssignedProductIdentifier1 : 662850002421
ExternallyAssignedProductIdentifier2 : 0662850002421
ExternallyAssignedProductIdentifier3 : 00662850002421
FinishType : Uncoated
GpsrSafetyAttestation : 1
IncludedComponents : PILOT PIN
ItemName : Hougen 12140 1-1/4" X 1" Rotabroach "12, 000-Series" M2 High Speed Steel Magnetic Drill Annular Cutter (for Use with Pilot 10527)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : annular-cutters
Manufacturer : Hougen Mfg.
Material : High Speed Steel
ModelName : GNKFDBST
ModelNumber : 12140
NumberOfCuttingEdges : 1
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : 12140
ProductDescription : For use with hougen portable magnetic drills andpetitive models on materials up to 275 bhn (28. 5 hrc). They are made of hardened m2 high speed steel and are precision ground for excellent performance throughout the cut and long tool life. They require less horsepower and thrust to cut, and last much longer than traditional holemaking methods. "12, 000-series" cutters have a 3/4" diameter double-flatted shank. Modified end tooth geometry is also available for drilling in stacked plate applications. For extended tool life and lower cost per hole "12, 000-series" cutters are resharpenable.
ProductSiteLaunchDate : 2011-12-11T21:43:09.429Z
Size : One Size
Style : Compact
SupplierDeclaredDgHzRegulation : other
SurfaceRecommendation : Stainless Steel
ToleranceHeld : Precision
UnitCount : 1
UnspscCode : 27112700