Cart 2 india

Specification
Brand : Hougen
BulletPoint1 : ✔️ TWO FLATS FOR CUTTER MOUNTING - This system is very rigid and offers up to 2x the tool life as compared to quick change or one touch tool mounting systems.
BulletPoint2 : ✔️ GROUNDED & FULLY FLUTED - Provides better chip evacuation, requires less HP and offers better performance in deeper holes
BulletPoint3 : ✔️ O.D. MARGINS - Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish.
BulletPoint4 : ✔️ PATENTED HOUGEN-EDGE GEOMETRY - Provides faster, smoother cuts, with less chatter. Each tooth has two or three angles.
BulletPoint5 : ✔️ I.D. TAPER - Relief area between slug and cutter. Reduces horsepower and improves slug ejection. PILOT IS NOT INCLUDED USE WITH PILOT HOUGEN 10527.
Color : Gray
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 9399413894155
ExternallyAssignedProductIdentifier1 : 662850002322
ExternallyAssignedProductIdentifier2 : 0662850002322
FinishType : Brass
GpsrSafetyAttestation : 1
ItemDisplayDimensions_Height : 1 inches
ItemDisplayDimensions_Length : 9 inches
ItemDisplayDimensions_Width : 7 inches
ItemName : Hougen 12122 11/16 Inch Diameter x 1 Inch Depth of Cut 12,000 Series High Speed Steel Annular Cutter 3/4 Inch Weldon Shank for Magnetic Drills
ItemPackageDimensions_Height : 9.8 centimeters
ItemPackageDimensions_Length : 2.9 centimeters
ItemPackageDimensions_Width : 3.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : annular-cutters
Manufacturer : Hougen
Material : M2 High Speed Steel
ModelNumber : 12122
NumberOfFlutes : 1
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : 12122
ProductDescription : For use with hougen portable magnetic drills and competitive models on materials up to 275 bhn (28. 5 hrc). They are made of hardened m2 high speed steel and are precision ground for excellent performance throughout the cut and long tool life. They require less horsepower and thrust to cut, and last much longer than traditional holemaking methods. "12, 000-series" cutters have a 3/4" diameter double-flatted shank. Modified end tooth geometry is also available for drilling in stacked plate applications. For extended tool life and lower cost per hole "12, 000-series" cutters are resharpenable.
ProductSiteLaunchDate : 2016-08-17T19:29:45.239Z
Size : 1 piece
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Metal,Steel
UnitCount : 1
UnspscCode : 20121600