Cart 2 india

Specification
Brand : HFS
BulletPoint1 : [Size]: This annular cutter measures 5/8" in diameter with a 1" depth of cut, providing precise and efficient cutting performance.
BulletPoint2 : [Material]: Made from M2AL high-speed steel, it offers longer service life and excellent heat resistance, ensuring durability and reliability.
BulletPoint3 : [Packing]: Comes with a 3/4" Weldon shank with 2 flats, fitting most standard magnetic drill presses, and includes one 3" pilot pin for added convenience.
BulletPoint4 : [Scope of Application]: Compatible with almost all major brands of magnetic drills and can also be used with machine tools such as mills and large drill presses with tool holders.
BulletPoint5 : [Applicable Materials]: Suitable for cutting a variety of materials, including wood, steel plates, aluminum, brass, cast iron, and lower BHN stainless steel.
BulletPoint6 : In a grey kraft packing
CustomerPackageType : Standard Packaging
CuttingAngleString : 135 degrees
ExternallyAssignedProductIdentifier1 : 099854266526
ExternallyAssignedProductIdentifier2 : 0099854266526
FinishType : Uncoated
GpsrSafetyAttestation : 1
IncludedComponents : Pilot Pin
ItemDisplayDimensions_Length : 5 inches
ItemDisplayWeight : 0.6 kilograms
ItemName : HFS(R) Annular Cutter with 3" Pilot Pin High Speed Steel for Magnetic Drill Press 5/8-Inch Diameter x 1-Inch Depth of Cut
ItemPackageDimensions_Height : 10.8 centimeters
ItemPackageDimensions_Length : 2.6 centimeters
ItemPackageDimensions_Width : 2.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : annular-cutters
Manufacturer : HFS
Material : High Speed Steel
ModelNumber : ACUT-0508IN
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : ACUT-0508IN
ProductDescription : 1.The cutting speed=20-25m/min 2.The reasonable rotate feed amount shall be fn=0.08-0.13mm/r. The reasonable feed rate shall be vf=36-60mm/min. "Weldon shank" annular cutters have 2 flats and fix in the chuck by tightening grub screws in the two flat areas. 3. Insert the ejector pin inside the annular cutter. Fill the coolant tank with oil lubrication, never use the machine without lubricant
ProductSiteLaunchDate : 2020-09-07T03:13:46.666Z
Size : 5/8-INCH
StreetDate : 2017-05-31T00:00:01Z
Style : 2" Depth of Cut
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
SurfaceRecommendation1 : Stainless Steel
SurfaceRecommendation2 : Metal
UnitCount : 1
UnspscCode : 27112800
Voltage : 110 volts